Hi I would like to connect with the pc of a private network that is linked to internet through a pirelli router. Reading your mailing list I have to di the port forwarding...but what are the port involved? More over how can i write a rules about an ip, like mine, that is not static?
The router has a static ip, and though the virtual server I opened the doors 5800 and 5900, both redirected to 192.168.2.99, the pc where there is the server installed.... But when I try to connect the program says me that has not find the server or that it can connect to it... According to me this is because the router has a firewall, in fact I tryed to configure also it but I don't know if it's the right way? In firewall setting I've set that ips 0.0.0.0 with submask 255.255.255.255 from port 5900/5800 to port 5900/5800 can enter and the destination is 192.168.2.99 with submask 255.255.255.0 from port 5900/5800 to port 5900/5800. (Protocol tcp) But under this settings there is write: ______________________________________________________ Note: If Ip = 0.0.0.0, addresses are ignored If Wan = alias wan IP address If From = 0 and To = 0, ports are ignored If Protocol = IP, ports are ignored _____________________________________________________ What this means? That I cannot connect? Summaring....what I would like to do? Use remotely a pc appartaining to a lan private network that is behind a router.... PS If tcp is the protocol for 5800/5900 waht are the ports for protocol upd? _______________________________________________ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
