Thanks for the recommendation. How do I learn how to do this? Is it just as simple as "removing" all the networking hardware and rebooting? Or is that just wishful thinking?
TIA, -Ron generally, whenever i see "10061", 9 times out of ten it's a "uuuggghhhhh... reinstalling the tcp/ip stack..." -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of James Weatherall Sent: Wednesday, August 11, 2004 12:43 PM To: 'Ronald B Miller' Cc: [EMAIL PROTECTED] Subject: RE: Error 10061 on one of two systems Ronald, You misunderstand: error 10061 indicates that the server computer didn't even accept the TCP connection in the first place - the connection never got to the stage of being connected nor authenticated. This is why there is no logged connection in the .log file. Possible causes are: - Broken TCP stack on the second machine - Broken DNS setip on the second machine (what form of VNC Viewer address do you use?) - A firewall configuration at the server that permits connections only from certain addresses - A firewall configuration at the server that permits connections only via certain network interfaces - Some sort of firewall software on the second machine, that is aborting the connection at the source. Wez @ RealVNC Ltd. > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Ronald B Miller > Sent: 11 August 2004 18:11 > To: James Weatherall > Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED] > Subject: RE: Error 10061 on one of two systems > > Hi, > > Thanks for the response. A couple of things, tho. I have > two systems > sitting side by side on my desk. On one (the old one) I can > connect to the VNC server running on the UNIX system. Then > if I close that connection and on the new PC try to connect > to the UNIX server, I cannot. So there must be something > listening on that port on the UNIX host and there can't be a > problem on that end (such as firewall rules) since I can > successfully connect with the old system. > > Also, when the 'old' box connects I get an entry in > $HOME/.vnc/aker:1.log (aker is the UNIX system). When I try > to connect with the new XP, no entries are made to any log > files in that directory. Also, altho I have opened up all > ports for VNC in my new pc's firewall, I have also had it > fail with the firewall disabled so it's not that either. > > How does vncpasswd come into play? How does the server process: > > rbmiller 322 1 0 12:30:25 ? 0:13 Xvnc :1 > -desktop aker:1 () > -httpd /usr/local/vnc/classes -auth /export/home/rbm > > authenticate the connection? Is this perhaps why VNC is > refusing the connection? If so, how do I make my new > computer able to authenticate? > > Thanks in advance, > > -Ron Miller > > > > > > > Ronald, > > Error 100061 is the Winsock 2 error for "the server refused > the connection" > - it's not ubiquitous, it specifically means that the server > machine won't accept a connection on the specified port. The > most likely cause is that there is nothing on that port to > connect to. In this case, that's probably because your > Solaris Xvnc process is not remoting display zero, but > display 1, 2 or 3, or etc > > Wez @ RealVNC Ltd. > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of Ronald B Miller > > Sent: 10 August 2004 19:25 > > To: [EMAIL PROTECTED] > > Subject: Error 10061 on one of two systems > > > > Hi, Folks, > > > > I have recently purchased a new computer to replace my 3 > year old one. > > They are both Windows XP and both successfully use a VPN client to > > connect to work. One of them can connect the VNC ver 4 > viewer to the > > Solaris 8 system running VNC Server at the other end of my > VPN. The > > new one can't connect and gives the ubiquitous error 10061. I have > > added ports 5800 and 5900/tcp inbound/outbound to my > firewall and can > > ping the system I'm trying to connect to but I cannot > telnet to that > > system using those ports (e.g.: > > telnet server.ibm.com 5800 where 'server' is the Solaris box). > > > > Any ideas? > > > > Cheers, > > > > > > -Ron > > > > > > rbmiller at us dot ibm dot com > > _______________________________________________ > > VNC-List mailing list > > [EMAIL PROTECTED] > > To remove yourself from the list visit: > > http://www.realvnc.com/mailman/listinfo/vnc-list [demime 0.99d.1 removed an attachment of type image/gif which had a name of graycol.gif] _______________________________________________ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
