I am using VNC with several workstations in a LAN and it works very well. Also connection through a firewall-router are working.
But now i have a little problem: I assembled a network at a company with three workstations. Workstation 1: 192.168.1.100 (Office1) Workstation 2: 192.168.1.101 (Office2) Workstation 3: 192.168.1.102 (Notebook) Workstation 4: 192.168.1.103 (Fileserver) Internet-Connection is over a WLAN-Firewall-Router (Linksys WRT54G) with IP 192.168.1.1. The ports 5800 and 5900 are open for the use with VNC and are forwared to all for IP`s of the workstations. On every workstation the VNC4 Server is installed and starts at power-on. NOW THE PROBLEM: How do i connect to the several workstation behind the firewall-router. When i enter the IP of the router (e.g. 80.xxx.xx.xx) i always get connected to the workstation OFFICE1 with the IP 192.168.1.100. How can i specify when entering which workstation i want to connect with? _______________________________________________ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
