hi. you need access to vnc server propertis in each computer and change the port number. ej. computer ip 192.168.1.2 5900 and 5800 for http java server (this port number is the default for each instalation you made) computer ip 192.168.1.3 5901 and 5801. you need this in evevry computer you have.
now if you have a dynamic ip trought your dhcp server in your router; you only need is to change the port number in every vnc server propertis. then in your router you need to configure to fordware that port number. ej. port 5900 fordware to ip 192.168.0.1 port 5900. port 5901 fordware to ip 192.168.0.2 port 5901. and this to each computer you have. this depend of your router you have some router have the option to only fordware ports other have the option to open virtual servers, in this case is olmost the same; you need to give the port in internet side and give the ip and port in yoyr lan ide. i hope this can help you to resolve your problem. ----- Original Message ----- From: "Nestor A. Angel" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, October 20, 2004 10:45 AM Subject: How to access different computer inside a home network? > I have a problem accessing computers from my own house. > > Environment: Cable modem connected to a Linksys Wireless/router. Two > wireless computers are connected to the router and they can go to the > internet. Two wire computers are connected the same way. All computer > receive an IP from the router. IP addresses 192.168.1.2 - 192.168.1.5. > I Set up the router to allowed the ports for VNC to go throw the router > into the private network. In each computer the VNC software is install > and I am able to connect internally to all of the computers. > > Issue: I am able to log into the first computer 192.168.1.2 with out any > problem from the internet but I am not able to connect to any other > computer (IP 192.168.1.3 to 192.168.1.5). > > Question: Because I only have an IP address from the cable company, is > there a way, I am able to connect to any of the other computers? > > Is there a way to specify a port number to connect to a specific > computer? > > For example: > > When using VNC to connect to 202.202.202.202 internal IP 192.168.1.2 > CONNECTS OK > > Is there a way I am able to use VNC with an specific port number to > connect to another computer? > Use VNC to connect to 202.202.202.202:(port number) internal IP > 192.168.1.2 > 202.202.202.202:5556 to connect to internal IP 192.168.1.2 > 202.202.202.202:5557 to connect to internal IP 192.168.1.3 > 202.202.202.202:5558 to connect to internal IP 192.168.1.4 > > I am not sure is this is a feature of the VNC software but I really > would like to know if there is a way to accomplish this. > > Thank you in advance for all your help. > > > Nestor A. Angel MCSE, CNA, MCP-I, A+ > MIS Manager > Dynamic Manufacturing Inc. > Phone: 708 343.9833 > Fax: 708.343.8768 > E-Mail: [EMAIL PROTECTED] > _______________________________________________ > VNC-List mailing list > [EMAIL PROTECTED] > To remove yourself from the list visit: > http://www.realvnc.com/mailman/listinfo/vnc-list _______________________________________________ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
