Gracias por la ayuda, les agradeceria me apoyaran con unos nuevos n0 telefonos en los cuales no puedo tener acceso por el vnc, los numeros son los siguiente ; 300707 630604, desde ya muchas gracias ...
2006/2/10, [EMAIL PROTECTED] <[EMAIL PROTECTED]>: > > Send VNC-List mailing list submissions to > [email protected] > > To subscribe or unsubscribe via the World Wide Web, visit > http://www.realvnc.com/mailman/listinfo/vnc-list > or, via email, send a message with subject or body 'help' to > [EMAIL PROTECTED] > > You can reach the person managing the list at > [EMAIL PROTECTED] > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of VNC-List digest..." > > > Today's Topics: > > 1. Xvnc hangs on solaris ([EMAIL PROTECTED]) > 2. Unable to connect across Internet (Adam Stuart) > 3. RE: Unable to connect across Internet (John Aldrich) > 4. Re: Netiquette request to all (Jaroslaw Rafa) > 5. command line ? (beau) > 6. Re: Can't connect using DynDNS (Scott C. Best) > 7. Re: Can't connect using DynDNS (Steven D. Clark) > 8. Re: Can't connect using DynDNS (Steven D. Clark) > 9. Re: Netiquette request to all (Agent Smith) > 10. VNC server behind cable modem (John Hagens) > 11. Re: Netiquette request to all (Jaroslaw Rafa) > 12. Can we disable VNC on the tray (Shiju Jacob) > 13. Re: I was hacked by a VNC user! (Stephen Fromm) > 14. RE: I was hacked by a VNC user! (James Weatherall) > 15. Re: Netiquette request to all (Felix E. Klee) > > --__--__-- > > Message: 1 > To: [email protected] > Subject: Xvnc hangs on solaris > From: [EMAIL PROTECTED] > Date: Thu, 9 Feb 2006 13:43:24 +0100 > > Hello, > > We are operating XVnc on Sun Solaris (64 bits env) and we use these > commands to start the service: > > xrdb /usr/dt/config/C/Xresources > xsetroot -solid grey > xterm -geometry 80x24+10+10 -ls -title "$VNCDESKTOP Desktop" & > twm & > > The solution works perfectly but sometimes we are experiencing a strange > problem. I mean the service works perfectly for a month or two then issue > appear: > > Clients can not connect to xserver sometimes and they receive this error: > > X connection to prodbox:13.0 broken (explicit kill or server shutdown). > > I checked processes but all of them look up and running so there is no > died process. We tried to turn it to audit mode so we can analyze the log > file. In the case of issue we can see that server does not accept new > connections but existing connections are working fine: > > AUDIT: Tue Jan 31 08:37:46 2006: 11413 Xvnc: client 30 disconnected > AUDIT: Tue Jan 31 08:39:01 2006: 11413 Xvnc: client 30 connected from IP > 192.168.120.2 port 62773 > AUDIT: Tue Jan 31 08:39:05 2006: 11413 Xvnc: client 30 disconnected > AUDIT: Tue Jan 31 08:39:31 2006: 11413 Xvnc: client 30 connected from IP > 192.168.120.2 port 62849 > AUDIT: Tue Jan 31 08:39:38 2006: 11413 Xvnc: client 30 disconnected > > When the server looks freezed then it looks like this: > > AUDIT: Tue Jan 31 15:35:10 2006: 11413 Xvnc: client 34 connected from IP > 192.168.120.2 port 47060 > AUDIT: Tue Jan 31 15:35:10 2006: 11413 Xvnc: client 34 disconnected > AUDIT: Tue Jan 31 15:39:34 2006: 11413 Xvnc: client 34 disconnected > AUDIT: Tue Jan 31 15:39:34 2006: 11413 Xvnc: client 35 disconnected > AUDIT: Tue Jan 31 15:39:34 2006: 11413 Xvnc: client 36 disconnected > AUDIT: Tue Jan 31 15:43:41 2006: 11413 Xvnc: client 34 disconnected > AUDIT: Tue Jan 31 15:43:41 2006: 11413 Xvnc: client 35 disconnected > AUDIT: Tue Jan 31 15:47:35 2006: 11413 Xvnc: client 34 disconnected > AUDIT: Tue Jan 31 15:47:35 2006: 11413 Xvnc: client 35 disconnected > AUDIT: Tue Jan 31 15:47:35 2006: 11413 Xvnc: client 36 disconnected > AUDIT: Tue Jan 31 15:48:48 2006: 11413 Xvnc: client 34 disconnected > AUDIT: Tue Jan 31 15:48:48 2006: 11413 Xvnc: client 35 disconnected > AUDIT: Tue Jan 31 15:49:16 2006: 11413 Xvnc: client 36 disconnected > AUDIT: Tue Jan 31 15:49:16 2006: 11413 Xvnc: client 37 disconnected > AUDIT: Tue Jan 31 15:49:49 2006: 11413 Xvnc: client 34 disconnected > > Any help would be appreciated. Thank you in advance. > > Best regards, > > Sandor > > --__--__-- > > Message: 2 > From: "Adam Stuart" <[EMAIL PROTECTED]> > To: <[email protected]> > Subject: Unable to connect across Internet > Date: Thu, 9 Feb 2006 09:27:03 -0500 > > Hi: > > I am running 15 computers behind a firewall. All computers are Win XP and > the > office is connected via ethernet cable, with DSL as our connection. I > installed VNC, set up a static IP address on all computers, and can view > all > office computers from any other without problems. I tried to connect to > one of > my office computers from my home. I installed a VNC viewer on my home > office > PC running Win XP and keep getting "connection timed out" errors. I am > using > the same static IP address which works while I am in the office, so why > can't > I connect across the Internet when the computers (Server and Viewer) are > not > physically connected? > > Thanks. > > Adam > > --__--__-- > > Message: 3 > From: John Aldrich <[EMAIL PROTECTED]> > To: "'Adam Stuart'" <[EMAIL PROTECTED]>, [email protected] > Subject: RE: Unable to connect across Internet > Date: Thu, 9 Feb 2006 10:42:00 -0500 > > Adam: > To connect across the internet, you need to do two things: > 1) Set up port forwarding in your router such that each machine you want > to > reach from outside has it's own unique port number for VNC which is > forwarded to that machine from the outside world. > > 2) The "LAN IP" (i.e. 192.168.x.y or 10.x.y.z, etc) address is not a > "routeable" IP address. That IP does not travel over the internet. When it > gets to your router, it is changed to the "real" IP of your router and > that's the only IP that the rest of the world sees. > > So, for example, if your router's EXTERNAL / Real IP address is > 123.231.213.111 (just to pick a number out of a hat) and you want to > connect > to a machine behind the router at 192.168.1.2, for example, you'd have to > set your router to "forward" port 5900 to 192.168.1.2 from 123.231.213.111 > so that anything attempting to connect to 123.231.213.111 on port 5900 > would > be sent to 192.168.1.2. > > Please see http://faq.gotomyvnc.com/fom-serve/cache/133.html (FAQ about > routers, VNC and port forwarding which explains it MUCH better and in MUCH > mroe detail than I can go into here.) Also please see > http://www.portforward.com for a bunch of good "how-to" documentation on a > variety of popular router brands and models. > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Behalf Of Adam Stuart > Sent: Thursday, February 09, 2006 9:27 AM > To: [email protected] > Subject: Unable to connect across Internet > > > Hi: > > I am running 15 computers behind a firewall. All computers are Win XP and > the > office is connected via ethernet cable, with DSL as our connection. I > installed VNC, set up a static IP address on all computers, and can view > all > office computers from any other without problems. I tried to connect to > one > of > my office computers from my home. I installed a VNC viewer on my home > office > PC running Win XP and keep getting "connection timed out" errors. I am > using > the same static IP address which works while I am in the office, so why > can't > I connect across the Internet when the computers (Server and Viewer) are > not > physically connected? > > Thanks. > > Adam > _______________________________________________ > VNC-List mailing list > [email protected] > To remove yourself from the list visit: > http://www.realvnc.com/mailman/listinfo/vnc-list > > --__--__-- > > Message: 4 > From: Jaroslaw Rafa <[EMAIL PROTECTED]> > Subject: Re: Netiquette request to all > To: [email protected] > Date: Thu, 9 Feb 2006 22:52:55 +0100 (MET) > > John Aldrich napisal(a): > > Unfortunately, I'm stuck with M$ LookOut...err. Outlook for my mail > client. > > I can't help it. I'm afraid you're going to have to deal with some > > Outlook-style quoting. I realize it's not "Compliant" with netiquette, > but > > that can't be helped. I'm guessing a lot of other people are in the same > > Actually, it's not a matter of email client, it's only a matter of > behaviour. One can use proper, netiquette-compliant quoting even when > using > MS Outlook. Nothing prohibits you from moving the cursor when replying to > a > message from the top (where Outlook places it by default) to the bottom, > and > writing there, and from deleting unnecessary lines from quoted text. > Myself, I was doing it all the time even when using Outlook - I was using > it > for a few years until Thunderbird came and kicked (in my opinion) Outlook > completely out of business ;-). > Regards, > Jaroslaw Rafa > [EMAIL PROTECTED] > -- > Spam, wirusy, spyware... masz do6f? Jest alternatywa! > http://www.firefox.pl/ --- http://www.thunderbird.pl/ > Szybciej. #atwiej. Bezpieczniej. Internet tak jak lubisz. > > --__--__-- > > Message: 5 > Date: Thu, 09 Feb 2006 16:02:06 -0600 > From: beau <[EMAIL PROTECTED]> > To: [email protected] > Subject: command line ? > > hi all i new to the group > this is the line i use "C:\Program Files\RealVNC\VNC4\winvnc4.exe" > -noconsole -start > is there a command i can use to to keep the message box from poping up > that shows it has started thanks beau > > --__--__-- > > Message: 6 > Date: Thu, 9 Feb 2006 23:17:30 +0000 (GMT) > From: "Scott C. Best" <[EMAIL PROTECTED]> > To: [email protected] > cc: [EMAIL PROTECTED], [EMAIL PROTECTED] > Subject: Re: Can't connect using DynDNS > > Michael: > > Heya. I think John's suggestion is a good one: some DynDNS > clients monitor for a change in IP address *of the PC they're > running on*, which doesn't help very much if the PC is behind a > router. Activating a DynDNS client that's embedded in the router > itself will be much more reliable (though possibly more expensive). > > Alternatively, some EchoVNC users log into the free demo > server and use that as a DynDNS equivalent. If you connect there > as "charliebrown928", you can make EchoVNC connections to just > "charliebrown928" from wherever. > > cheers, > Scott > > > > Wrong -- you CAN ping a dyndns address. What probably happened is your > IP > > address has changed and your DYNDNS account is out-of-date. That's > happened > > to me a couple times. Make sure you have a DYNDNS client of some sort > > running on your network and make sure it's able to connect to update > your > > account with your current IP address. Some routers will actually have > DYNDNS > > support built-in. I, personally, don't trust that and run two other > clients, > > one for no-ip.info and one for ZoneEdit.com. That way, I'll *always* > have at > > least one valid account, so long as my DSL connection is up and running. > :-) > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > > > Behalf Of Michael Murray > > > Sent: Tuesday, February 07, 2006 9:02 AM > > > To: [email protected] > > > Subject: Can't connect using DynDNS > > > > > > I just signed up for DynDNS so that I can have a static domain address > > > for dynamic IP my ISP assigns me. I have that set up correctly along > > > with port forwarding from my router. However, I recently found out > > > that you can't ping a DynDNS address. I also saw that if you can't > > > ping, RealVNC won't connect. What can I do? Thanks. > > --__--__-- > > Message: 7 > From: "Steven D. Clark" <[EMAIL PROTECTED]> > To: <[email protected]> > Subject: Re: Can't connect using DynDNS > Date: Thu, 9 Feb 2006 17:01:28 -0700 > > It is important to configure the DynDNS client so that it monitors the > change in the router's WAN IP. > The client I use (DynDNS Updater) has a radio control on the connections > tab > that should be set to "local area network" if the machine hosting the > DynDNS > client is behind a router. Local IP address must then be specify under > the > IP Address tab. > > > ----- Original Message ----- > From: "Scott C. Best" <[EMAIL PROTECTED]> > To: <[email protected]> > Cc: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> > Sent: Thursday, February 09, 2006 4:17 PM > Subject: Re: Can't connect using DynDNS > > > > Michael: > > > > Heya. I think John's suggestion is a good one: some DynDNS > > clients monitor for a change in IP address *of the PC they're running > on*, > > which doesn't help very much if the PC is behind a > > router. Activating a DynDNS client that's embedded in the router > > itself will be much more reliable (though possibly more expensive). > > > > Alternatively, some EchoVNC users log into the free demo > > server and use that as a DynDNS equivalent. If you connect there > > as "charliebrown928", you can make EchoVNC connections to just > > "charliebrown928" from wherever. > > > > cheers, > > Scott > > > > > >> Wrong -- you CAN ping a dyndns address. What probably happened is your > IP > >> address has changed and your DYNDNS account is out-of-date. That's > >> happened > >> to me a couple times. Make sure you have a DYNDNS client of some sort > >> running on your network and make sure it's able to connect to update > your > >> account with your current IP address. Some routers will actually have > >> DYNDNS > >> support built-in. I, personally, don't trust that and run two other > >> clients, > >> one for no-ip.info and one for ZoneEdit.com. That way, I'll *always* > have > >> at > >> least one valid account, so long as my DSL connection is up and > running. > >> :-) > >> > >> > -----Original Message----- > >> > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > ]On > >> > Behalf Of Michael Murray > >> > Sent: Tuesday, February 07, 2006 9:02 AM > >> > To: [email protected] > >> > Subject: Can't connect using DynDNS > >> > > >> > I just signed up for DynDNS so that I can have a static domain > address > >> > for dynamic IP my ISP assigns me. I have that set up correctly along > >> > with port forwarding from my router. However, I recently found out > >> > that you can't ping a DynDNS address. I also saw that if you can't > >> > ping, RealVNC won't connect. What can I do? Thanks. > > _______________________________________________ > > VNC-List mailing list > > [email protected] > > To remove yourself from the list visit: > > http://www.realvnc.com/mailman/listinfo/vnc-list > > --__--__-- > > Message: 8 > From: "Steven D. Clark" <[EMAIL PROTECTED]> > To: <[email protected]> > Subject: Re: Can't connect using DynDNS > Date: Thu, 9 Feb 2006 17:12:56 -0700 > > one more note: VNC CAN connect even if the router doesn't reply to a ping. > All that is necessary is that the DynDNS name gets translated to your > router's external IP address and the router forwards the connection > request > to the PC running VNC server. > > Example: <myname>.homeip.net is updated by my DynDNS client translate to > the external IP address of my router. > > If I try to ping <myname>.homeip.net from a machine outside my LAN, the > name > is translated to the IP address assigned by my ISP, but my router is > configured to NOT respond. > > My VNC Viewer has no trouble connecting to <myname>.homeip.net because > port > 5900 is forwarded to my machine running VNC Server. > > > ----- Original Message ----- > From: "Scott C. Best" <[EMAIL PROTECTED]> > To: <[email protected]> > Cc: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> > Sent: Thursday, February 09, 2006 4:17 PM > Subject: Re: Can't connect using DynDNS > > > > Michael: > > > > Heya. I think John's suggestion is a good one: some DynDNS > > clients monitor for a change in IP address *of the PC they're running > on*, > > which doesn't help very much if the PC is behind a > > router. Activating a DynDNS client that's embedded in the router > > itself will be much more reliable (though possibly more expensive). > > > > Alternatively, some EchoVNC users log into the free demo > > server and use that as a DynDNS equivalent. If you connect there > > as "charliebrown928", you can make EchoVNC connections to just > > "charliebrown928" from wherever. > > > > cheers, > > Scott > > > > > >> Wrong -- you CAN ping a dyndns address. What probably happened is your > IP > >> address has changed and your DYNDNS account is out-of-date. That's > >> happened > >> to me a couple times. Make sure you have a DYNDNS client of some sort > >> running on your network and make sure it's able to connect to update > your > >> account with your current IP address. Some routers will actually have > >> DYNDNS > >> support built-in. I, personally, don't trust that and run two other > >> clients, > >> one for no-ip.info and one for ZoneEdit.com. That way, I'll *always* > have > >> at > >> least one valid account, so long as my DSL connection is up and > running. > >> :-) > >> > >> > -----Original Message----- > >> > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > ]On > >> > Behalf Of Michael Murray > >> > Sent: Tuesday, February 07, 2006 9:02 AM > >> > To: [email protected] > >> > Subject: Can't connect using DynDNS > >> > > >> > I just signed up for DynDNS so that I can have a static domain > address > >> > for dynamic IP my ISP assigns me. I have that set up correctly along > >> > with port forwarding from my router. However, I recently found out > >> > that you can't ping a DynDNS address. I also saw that if you can't > >> > ping, RealVNC won't connect. What can I do? Thanks. > > _______________________________________________ > > VNC-List mailing list > > [email protected] > > To remove yourself from the list visit: > > http://www.realvnc.com/mailman/listinfo/vnc-list > > --__--__-- > > Message: 9 > Date: Thu, 9 Feb 2006 18:02:16 -0800 (PST) > From: Agent Smith <[EMAIL PROTECTED]> > Subject: Re: Netiquette request to all > To: [email protected] > > I actually like having the new messages on the top. > When I am following a discussion I do not have to > scroll through the quoted text to find the new > content. I also don't mind having the entire message > quoted since I can easily look back on the discussion > and see what has been said. When giving help it's > important to have the previous comments so you know > what's been said and to not repeat information. > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com > > --__--__-- > > Message: 10 > From: "John Hagens" <[EMAIL PROTECTED]> > To: [email protected] > Date: Fri, 10 Feb 2006 11:37:43 +0800 > Subject: VNC server behind cable modem > > I have a cable modem and set up a RealVNC server on a only computer > connected to the cable modem and there is no router. I am trying to access > my computer from outside by using my internet IP address., this does not > work however and I always receive error message, I cannot ping to the IP > address also.., is there any way I can get around this problem..I have tried > all the available help..I will be happy for any suggestions/help... > > Thanks in advance > > -- > _______________________________________________ > Get your free email from http://fastermail.com > > --__--__-- > > Message: 11 > From: Jaroslaw Rafa <[EMAIL PROTECTED]> > Subject: Re: Netiquette request to all > To: [email protected] > Date: Fri, 10 Feb 2006 08:56:13 +0100 (MET) > > Agent Smith napisal(a): > [Charset iso-8859-1 unsupported, filtering to ASCII...] > > I actually like having the new messages on the top. > > When I am following a discussion I do not have to > > scroll through the quoted text to find the new > > content. I also don't mind having the entire message > > quoted since I can easily look back on the discussion > > It is like having such a conversation: > > Answer: Because you have to read backwards. > Question: Why is it inconvenient? > Answer: Replying at the top of the message. > Question: What is a problem then? > Answer: No. > Question: Is everything OK with mailing lists? > > Does it make sense? For me not. I prefer reading from top to bottom, not > from bottom to top. I read an answer at the top and I don't know the > question! (Actually, on this mailing list, I often get the replies before > the messages that are replied to, and in such case having to read the > message from bottom to top to find out what's going on is really > annoying.) > I have to scroll down through the entire message (untrimmed! - and that's > even worse than quoting at the top) to find the part somebody is referring > to. > E-mail, and especially a mailing list, is more like a live conversation, > where question comes before the answer, rather than a formal business > letter, where you attach the documents you are referring to at the end. I > prefer to read this conversation like I'd be reading a dialogue in the > book, > and not the reverse way. > Read the links I have posted previously - they will give you tons of > arguments, why classical style of quoting is better. > > In my opinion, nobody would ever think of this "backwards" style of > quoting > - because it's illogical - if Microsoft didn't put the cursor at the top > of > the message in Outlook. Maybe they did it just accidentally, they didn't > care whether the cursor is at top or at botom, and people took it for > granted and started all typing there instead of going to the end of the > message first... > Regards, > Jaroslaw Rafa > [EMAIL PROTECTED] > -- > Spam, wirusy, spyware... masz do6f? Jest alternatywa! > http://www.firefox.pl/ --- http://www.thunderbird.pl/ > Szybciej. #atwiej. Bezpieczniej. Internet tak jak lubisz. > > --__--__-- > > Message: 12 > Reply-To: <[EMAIL PROTECTED]> > From: "Shiju Jacob" <[EMAIL PROTECTED]> > To: <[email protected]> > Subject: Can we disable VNC on the tray > Date: Fri, 10 Feb 2006 15:41:50 +0530 > Organization: Ccubed India > > Hi all > > > > I have installed VNC Server on my machine and now everything is working > fine > > Now I need that the icon of the VNC which should not shown on the tray but > everyone should login to the system using vnc viewer > > > > Thanks > > Shiju Jacob > > --__--__-- > > Message: 13 > From: "Stephen Fromm" <[EMAIL PROTECTED]> > To: "James Weatherall" <[EMAIL PROTECTED]>, <[email protected]> > Subject: Re: I was hacked by a VNC user! > Date: Fri, 10 Feb 2006 06:32:13 -0500 > > > We don't advise use of VNC Free Edition across the Internet except via > > some > > sort of secure tunnelling protocol. VNC Enterprise & Personal Editions > > have > > in-built session security for this purpose. All current VNC Server > > releases > > also support querying the local user to accept connections, which is > > advisable if you are concerned that the password you are using is weak > or > > widely known. > > But if I don't type any passwords, etc, once my connection is established, > what does the additional protection actually afford me? (Meaning, again, > if > the datastream itself doesn't need to be protected, but only the password > and ability to connect to the server.) > > Thanks in advance, > > SJF > > --__--__-- > > Message: 14 > From: "James Weatherall" <[EMAIL PROTECTED]> > To: "'Stephen Fromm'" <[EMAIL PROTECTED]>, <[email protected]> > Subject: RE: I was hacked by a VNC user! > Date: Fri, 10 Feb 2006 11:44:55 -0000 > Organization: RealVNC Ltd. > > Stephen, > > There's more to session security than simply visibility of key-presses to > nosey network neighbours. Without proper tanper-proofing, for example, > it's > possible for an attacker to gain access to a system by listening in on an > established session & hi-jacking it. > > Wez @ RealVNC Ltd. > > > > -----Original Message----- > > From: Stephen Fromm [mailto:[EMAIL PROTECTED] > > Sent: 10 February 2006 11:32 > > To: James Weatherall; [email protected] > > Subject: Re: I was hacked by a VNC user! > > > > > We don't advise use of VNC Free Edition across the Internet > > except via > > > some > > > sort of secure tunnelling protocol. VNC Enterprise & > > Personal Editions > > > have > > > in-built session security for this purpose. All current VNC Server > > > releases > > > also support querying the local user to accept connections, which is > > > advisable if you are concerned that the password you are > > using is weak or > > > widely known. > > > > But if I don't type any passwords, etc, once my connection is > > established, > > what does the additional protection actually afford me? > > (Meaning, again, if > > the datastream itself doesn't need to be protected, but only > > the password > > and ability to connect to the server.) > > > > Thanks in advance, > > > > SJF > > --__--__-- > > Message: 15 > From: "Felix E. Klee" <[EMAIL PROTECTED]> > To: [email protected] > Subject: Re: Netiquette request to all > Date: Fri, 10 Feb 2006 12:52:48 +0100 > > Am Freitag, 10. Februar 2006 03:02 schrieb Agent Smith: > > When I am following a discussion I do not have to > > scroll through the quoted text to find the new > > content. > > That's only an issue when people quote more than they have to. Good > quoting > guidelines: > > 1. Place your replies directly below the text that you're referring to. > > 2. Quote only that which is necessary - keep quotes short, and abbreviate > them > (e.g. using [...]) if necessary. > > Personally, most of the time, I don't even bother to read discussions > where > people use top-quoting. It's a waste of time, since often it's very hard > to > guess to what text passages the author of a posting is referring > to. Sure, > he could include references to those in his message, but with good quoting > he > doesn't have to. > > -- > Dipl.-Phys. Felix E. Klee > Email: [EMAIL PROTECTED] (work), [EMAIL PROTECTED] (home) > Tel: +49 721 8307937, Fax: +49 721 8307936 > Linuxburg, Goethestr. 15a, 76135 Karlsruhe, Germany > > > --__--__-- > > _______________________________________________ > > > VNC-List mailing list > > > [email protected] > > > http://www.realvnc.com/mailman/listinfo/vnc-list > > > > > End of VNC-List Digest > -- EMPRESA COMPUTACIONAL CABEL-INTEL 9-4721309 - 8-2794454 _______________________________________________ VNC-List mailing list [email protected] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
