This should be easy but I may be reading too much into the configuration. I currently use Netgear's Prosafe VPN client to allow a user to securely connect into their PC at the office
I also use a product called PCDUO (works much better the PCAnywhere) to allow me to attach to a server remotely. However, I would like to try to use VCN to connect to a PC at a remote location from my home After reading all the documentation, I'm still somewhat confused about the server and viewer differences. My thought is that the server portion would be installed on a Windows Server that is behind a nat'd router with a static private IP address (192.168.0.2). I would then add the port to the router and point it to 192.168.0.2. The viewer would then go on all the workstations on the network and my workstation at my home. You would then make a connection to the VCN server which is actually the Windows server itself and from there-to each workstation Or Do I install the server piece on all the remote workstations (after hard coding all their private IP addresses) and then install the viewer on my home system to allow me to connect to them. Please assist with my confusion Andreas Gieryic, [EMAIL PROTECTED] _______________________________________________ VNC-List mailing list [email protected] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
