your setup almost exactly mirrors mine (wrt 54g backbone, 2 computers wireless, one wired), but I don't have any ports open on the router. those settings are for the internet-facing side of the router, and don't affect the internal LAN operation. further, by opening the ports on the router, you're probably exposing your VNC server to the internet, something you probably don't want to do. my setup works fine without open ports, I'd look somewhere else for the answer.
Andy Etherington > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Behalf Of Doyal McVicker > Sent: Saturday, October 21, 2006 2:48 PM > To: Ken Burkhalter > Cc: [email protected] > Subject: Re: Unable to Connect to VNC server from within my LAN > > > Dear Mr. Burkhalter, > I had a similar problem. I found that I had to open the ports in the > Linksys router to allow the wireless connections to work. I used the > "Applications & Gamming settings to allow the ports to pass through. I > opened port ranges 5900-5903, 5800-5803 and 5500 to 5503. My system now > allows connections on the wireless to wired network to work. I > also open the > firewall to allow all ports connected to VNC to pass. I have yet to > encounter any problems with the system. > Sincerely, > Doyal McVicker > > ----- Original Message ----- > From: "Ken Burkhalter" <[EMAIL PROTECTED]> > To: <> > Sent: Saturday, October 21, 2006 9:08 AM > Subject: Unable to Connect to VNC server from within my LAN > > > >I have installed VNC Server on a computer on my wireless LAN. It is at > > 192.168.1.100. > > > > > > > > I can ping that machine just fine from other computers on my > LAN but can > > not > > access the VNC server from any of the other computers located at > > 192.168.1.102, and 192.168.1.103. > > > > > > > > All computers are running Windows XP-Home Edition and all are > fully up to > > date with Service Packs. > > > > > > > > I always get a Timeout Error > > > > > > > > I have turned the (Standard XP) Firewall Off on the Server > computer, but > > it > > did not help. > > > > > > > > The Network topology is: > > > > Internet > > > > | > > > > LinkSys WRT54GX2 Wireless Router>> >>CPU1 >>CPU2 > > > > | > > > > VNC Server CPU > > > > > > > > Where the "|" connections are hard wired and the ">>" are wireless > > connections. > > > > > > > > I am attempting to reach the VNC Server from CPU1. > > > > > > > > I have also set up the router to forward any requests for port > 5900 to the > > VNC computer. > > > > > > > > Have read all posts I can find but unable to locate any that > address this > > issue. > > > > > > > > Any ideas that might help me? > > > > > > > > Thanks. > > > > > > > > > > > > > > > > [:-)> > > > > Ken Burkhalter > > > > 734-604-3585 [cell] > > > > 734-475-2306 [home] > > > > [EMAIL PROTECTED] > > > > [demime 1.01d removed an attachment of type image/jpeg which > had a name of > > image006.jpg] > > > > [demime 1.01d removed an attachment of type image/jpeg which > had a name of > > image005.jpg] > > > > [demime 1.01d removed an attachment of type image/jpeg which > had a name of > > image004.jpg] > > _______________________________________________ > > VNC-List mailing list > > [email protected] > > To remove yourself from the list visit: > > http://www.realvnc.com/mailman/listinfo/vnc-list > _______________________________________________ > VNC-List mailing list > [email protected] > To remove yourself from the list visit: > http://www.realvnc.com/mailman/listinfo/vnc-list _______________________________________________ VNC-List mailing list [email protected] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
