Ti kanes, Irene - I thought you'd pick up on the name ... Unfortunately I'm third generation and we have almost exhausted my Hellenic vocabulary. So I'll be sticking to Midwestern English throughout. ;)
The way those keys get executed can get a little complicated to understand - it's precise, but not simple, and I'm not certain I know all the ins and outs yet. Below are (1) a couple of suggestions on what to try; (2) a note on the Dec/Hex issue;(3) a note on the way the keys are read. (1) What To Try It is _possible_ that we are seeing an issue unrelated to the registry key - may be VNC thinks there is some activity for some reason. Still, that's not my first bet. Let's try a couple of other things. First, you may want to switch that IdleTimeout value to about 60 or 90 to allow for rapid testing. (a) Create a Local per-user setting. You make a key under HKEY_LOCAL_MACHINE\Software\ORL\WinVNC3\ with your logon user name - if it's "rena", it would be HKEY_LOCAL_MACHINE\Software\ORL\WinVNC3\rena under that key, add the IdleTimeout value name and value. (b) If that doesn't work, Create a Global Per-User setting - when logged on as yourself, go to HKEY_CURRENT_USER\Software\ORL\WinVNC3 and put the setting directly under there. One of those 2 should work. ============================== (2) Dec/ Hex display of registry key - doesn't matter Whether you enter in decimal or hex is up to you - when you switch between the 2, it only changes how the number is displayed and how it interprets what you enter. So if you flip to hex, you will see the displayed value show 12C, the hex version of 300 decimal. Bottom line is, it doesn't matter and it's easier to enter in decimal for this. (3)The key priorities I'm going to digress a bit and tell you how those keys work before getting into the "service helper" thing. It looks like you understand this part fairly well since you actually dug through the documentation and found the values, so I suspect I will be reiterating what you already know. You have 4 places something might go; let's say you're logging on as user "rena". The locations where VNC will look for settings are: (a) HKEY_LOCAL_MACHINE\Software\ORL\WinVNC3\ [local machine-specific settings, what I call LMSS] (b) HKEY_LOCAL_MACHINE\Software\ORL\WinVNC3\Default [local default user settings, what I call LDU] (c) HKEY_LOCAL_MACHINE\Software\ORL\WinVNC3\rena [local per-user settings, what I call LPU] (d) for the logged on user, HKEY_CURRENT_USER\Software\ORL\WinVNC3 [global per-user settings, what I call GPU] Now, GPU will be read if you *do not* have an LPU key with a setting AllowProperties which is set to 0. Also, the "service helper" has to be run I believe before any of this is ever noticed. The service helper is available from the VNC program group and just runs the service with an additional switch, like this: "C:\Program Files\ORL\VNC\WinVNC.exe" -servicehelper I'm not certain how to make sure of whether those setting have been applied; one way to tell is to see if there are LPU keys. It sounds like you don't have any, so we may not need to worry about that. ----- Original Message ----- From: "Irene Giouvanos" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, 2002-04-17 13:08 Subject: Re: Setting IdleTime > Euxaristw Alex. > > I have the HKEY_LOCAL_MACHINE\Software\ORL\WinVNC3\Default set to 300 > Decimal > > Should that be decimal or hex? > > How can I detect if the "service helper" is running? I have VNC running as a > service. > > I donot have a setting for HKEY_LOCAL_MACHINE\Software\ORL\WinVNC3\<username> > Should I create one in there also? > > Na sai kala. > > Irene > > ----- Original Message ----- > From: Alex K. Angelopoulos > To: [EMAIL PROTECTED] > Sent: Wednesday, April 17, 2002 11:34 AM > Subject: Re: Setting IdleTime > > > That should be it. I assume you mean you set the value "IdleTimeout". > > That's a local or global per-user setting, so it should be in one of these > locations: > > > HKEY_LOCAL_MACHINE\Software\ORL\WinVNC3\<username> <--- will take > precedence > over the next key if not over-ridden > > HKEY_CURRENT_USER\Software\ORL\WinVNC3 > > HKEY_LOCAL_MACHINE\Software\ORL\WinVNC3\Default <--- this is the location if > you > don't have the "service helper" running > > ----- Original Message ----- > From: "Irene Giouvanos" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Wednesday, 2002-04-17 10:15 > Subject: Setting IdleTime > > > > Hi, > > > > I am new to VNC and I am trying to set the IdleTime on a Win2000 VNC > server. > > I wanted to set the Idle time to 5 minutes. I set the value to 300 > assuming > > that the measure of time is in seconds. > > > > After rebooting the machine I noticed that leaving the VNC viewer system > idle > > for over 20 minutes did not disconnect me. > > > > Can someone tell me what I am doing wrong? > > > > Any help is appreciated ad welcomed. > > > > Thanks. > > > > Irene > --------------------------------------------------------------------- > To unsubscribe, mail [EMAIL PROTECTED] with the line: > 'unsubscribe vnc-list' in the message BODY > See also: http://www.uk.research.att.com/vnc/intouch.html > --------------------------------------------------------------------- --------------------------------------------------------------------- To unsubscribe, mail [EMAIL PROTECTED] with the line: 'unsubscribe vnc-list' in the message BODY See also: http://www.uk.research.att.com/vnc/intouch.html ---------------------------------------------------------------------
