That's pretty cool. Have a feeling that given the logo not cheap though.
*Max Clark* Managing Director | Phyber Communications +1 (213) 929 1700 | [email protected] Visit us at www.phyber.com Hosting | Network | Voice On Wed, Feb 12, 2014 at 1:10 PM, Matthew Crocker <[email protected]>wrote: > > Broadsoft PacketSmart > > http://www.broadsoft.com/products/packetsmart/voippro/ > > -- > Matthew S. Crocker > President > Crocker Communications, Inc. > PO BOX 710 > Greenfield, MA 01302-0710 > > E: [email protected] > P: (413) 746-2760 > F: (413) 746-3704 > W: http://www.crocker.com > > > > On Feb 12, 2014, at 4:03 PM, Max Clark <[email protected]> wrote: > > Along this thought we've been looking for an appliance/probe that can be > easily installed behind the firewall at a customer location. Simply put > something simpler/cheaper than an Edgewater EdgeMarc. > > Max > > > *Max Clark* > Managing Director | Phyber Communications > +1 (213) 929 1700 | [email protected] > > Visit us at www.phyber.com > > Hosting | Network | Voice > > > On Wed, Feb 12, 2014 at 12:15 PM, Brian Knight > <[email protected]>wrote: > >> $DAY_JOB is at a national ISP/NSP where we resell VoIP services. We do >> peering with the VoIP carrier at one of our remote POP's. We are looking >> for a better way to be able to monitor the handoff of those calls to our >> carrier over that peering link. >> >> We have quite a bit of instrumentation within our walled garden to tell >> us about call quality. We can monitor our QOS policies to ensure packets >> aren't being dropped by intermediate routers. If the customer uses our >> routers to terminate their SIP session, we can pull call quality stats from >> those routers as well. We can also use our own office telephones to make >> and receive test telephone calls, and we can of course run Wireshark >> captures from the switches to which those phones are connected. >> >> However, we can't say for certain that the customer's RTP traffic >> actually made it on the wire connecting us to the VoIP provider, nor can we >> say that the traffic is being transmitted and received properly. The >> peering link is connected to a Cisco 12k router on our side, so there is no >> way (afaik) to mirror the port, as on a switch. >> >> For the moment, I am envisioning that we'll need to deploy a server >> running Wireshark to the remote POP. It will need two network interfaces; >> one connected to a management network, the other a capture interface. The >> capture interface will connect to a network tap, and the network tap >> connected in-line between our router and the patch panel. >> >> Wireshark is probably adequate for what we need. But I'm wondering if >> there is any software or an appliance that would do the job better. Given >> the usual details - calling number, called number, date and time - we want >> to be able to quickly inspect traffic and dig into the details of the >> stream. Do we see any missing packets from the media stream? What is the >> MOS score of a particular call? Do we see any missing packets coming from >> us? Any missing packets from the provider? >> >> Alerting on bad call quality would be a nice-to-have addition. >> >> Any recommendation would be appreciated. Thanks in advance. >> >> -Brian Knight >> >> _______________________________________________ >> VoiceOps mailing list >> [email protected] >> https://puck.nether.net/mailman/listinfo/voiceops >> >> > _______________________________________________ > VoiceOps mailing list > [email protected] > https://puck.nether.net/mailman/listinfo/voiceops > > >
_______________________________________________ VoiceOps mailing list [email protected] https://puck.nether.net/mailman/listinfo/voiceops
