Send and pray is what I¹ve always said with modems and voip. You can get it working about 98% of the time but there is always those gotchas that will make you pull your hair out and make you waste hrs and hrs or time.
Carlos Alcantar Race Communications / Race Team Member 1325 Howard Ave. #604, Burlingame, CA. 94010 Phone: +1 415 376 3314 / [email protected] / http://www.race.com On 9/9/14, 9:03 AM, "Tim Jackson" <[email protected]> wrote: >Sadly people still need outbound fax.. Just wait until you have that >user with an ATA and a fax machine faxing their fax->email service 40+ >times a day to get documents via email.. > >-- >Tim > >On Tue, Sep 9, 2014 at 8:33 AM, Victor Chukalovskiy ><[email protected]> wrote: >> An alternate route is to put you fax DIDs on a centralized fax-2-email >> platform. Thereby avoiding any ATA-related hassles. >> >> If done properly, will give you very satisfactory fax success rates >> >> >> On 14-09-09 10:39 AM, Jamey wrote: >>> >>> Hello, >>> We having been utilizing Grandstream ATAs (HT70X and GXW400X) as analog >>> hand offs with our Hosted Services built on the Broadworks platform and >>> Sansay's SBC. We've had regular trouble when using them with fax and >>>credit >>> card machines. We support t38 but have often gone to g711 >>>pass-through. >>> Echo cancellation is disabled. We've tested them with the various >>>jitter >>> buffer lengths, Rx/Tx setting adjustments and various impedance >>>values. The >>> results seem very inconsistent. This is site to site as well as >>> inconsistent results at the same site. The faxing/credit card >>>transmissions >>> will work for a period of time and then begin failing without any >>>changes. >>> >>> We are a CLEC who control the QoS from device out to the PSTN. We've >>>found >>> that replacing the ATA with a Adtran TA90X usually corrects the issues >>>but >>> this is not a cost effective solution. >>> >>> Anyone have similar experiences with Grandstream ATAs? Anyone have >>> reliable VoIP faxing with their ATAs? If anyone has been successful >>> integrating the Grandstreams, I would be interested in knowing what >>>config >>> changes you've made from their default. Which models you've used with >>>which >>> firmware? >>> >>> Anyone have other ATA's that seem to work well for faxing and credit >>>card >>> machines? We'd like to keep our offering to as few manufacturers as >>> possible that can offer 2, 4, 8+ FXS ports. >>> >>> Thanks for any and all recommendations. >>> >>> Jamey >>> Socket Telecom >>> _______________________________________________ >>> VoiceOps mailing list >>> [email protected] >>> https://puck.nether.net/mailman/listinfo/voiceops >> >> >> _______________________________________________ >> VoiceOps mailing list >> [email protected] >> https://puck.nether.net/mailman/listinfo/voiceops >_______________________________________________ >VoiceOps mailing list >[email protected] >https://puck.nether.net/mailman/listinfo/voiceops > _______________________________________________ VoiceOps mailing list [email protected] https://puck.nether.net/mailman/listinfo/voiceops
