Colton, You're in luck, sort of. There is a PCG but the SPA 8000 is pretty much like all the other generic Linksys SPA devices so you won't find any super specific help from BSoft on it. Main differences are # of ports and the addition of the trunk feature compared to the basic 1 or 2 line ATAs. I recommend logging into the ATA as "admin" and download the raw XML with the default config, then make some changes you're interested in and download a new copy of the XML, then diff them. There's also a bunch of dynamic cruft you can trim out of the configs, like the current time. For some reason, that stuff is exposed in the downloaded XML.
One more pointer I can offer is the indexing of trunks 1,2,3,4 are actually in the XML as 9,10,11,12 because the physical line ports are referenced with indexes 1-8 already. PCG is here: http://xchange.broadsoft.com/php/xchange/system/files/Interop/PartnerConfigurationGuides/PartnerConfigGuide_Cisco-Linksys_Voice_Adapters_and_Routers.pdf Good luck! -- Victor Breen Network Engineer Impulse Advanced Communications (805) 884-6337 ----- Original Message ----- > From: "Colton Conor" <[email protected]> > To: "Rob Dawson" <[email protected]> > Cc: [email protected] > Sent: Monday, March 16, 2015 11:16:18 AM > Subject: Re: [VoiceOps] Grandstream FXS Gateways > Is the SPA 8000 certified by Broadsoft? Seems like a great product as > it have both FXS ports via RJ-11 or by amp RJ-21. Does Broadsoft has > a device template for this unit? > On Mon, Mar 16, 2015 at 7:57 AM, Rob Dawson < [email protected] > > wrote: > > I'll second the SPA 8000, the only time we deployed a TA900 was if > > we > > were doing T1/PRI. > > > I like AudioCodes too but they are almost as expensive as Adtran > > from > > what I recall. > > > Rob > > > -----Original Message----- > > > From: VoiceOps [mailto: [email protected] ] On Behalf > > Of > > Ujjval Karihaloo > > > Sent: Sunday, March 15, 2015 2:33 PM > > > To: Colton Conor > > > Cc: [email protected] > > > Subject: Re: [VoiceOps] Grandstream FXS Gateways > > > Audiocodes MP series > > > Cisco SPA 8000 > > > Ujjval K > > > > On Mar 15, 2015, at 11:19 AM, Colton Conor < > > > [email protected] > > > > wrote: > > > > > > > > Does anyone use the Grandstream FXS gateways like the GXW4008? It > > > has 8 FXS ports, 1 FXO port, 2 Fast Ethernet Ports, and cost $156 > > > new from distribution. > > > > > > > > We are having more clients that need 2 to 8 phone lines. We > > > typically use Adtan 900/900e series gateways, but these gateways > > > new cost 3 to 4 times more than this Grandstream unit. One thing > > > we don't like about the Adtran units is they have built in T1/PRI > > > ports which we rarely use. > > > > > > > > > > > > > > > > I am wondering how good is the Grandstream SIP stack? How good is > > > its debug options? Does it have any voice quality monitoring > > > tools > > > like Adtran has built in? Does it have a web inteface where you > > > can see active calls, registrations, calls logs, etc? > > > > > > > > > > > > What other options besides Grandstream and Adtran are out there > > > for > > > multi line FXS gateways? I have heard good things about > > > Edgewater. > > > There are about a million no names FXS gateways out there it > > > seems. > > > > _______________________________________________ > > > > VoiceOps mailing list > > > > [email protected] > > > > https://puck.nether.net/mailman/listinfo/voiceops > > > _______________________________________________ > > > VoiceOps mailing list > > > [email protected] > > > https://puck.nether.net/mailman/listinfo/voiceops > > _______________________________________________ > VoiceOps mailing list > [email protected] > https://puck.nether.net/mailman/listinfo/voiceops
_______________________________________________ VoiceOps mailing list [email protected] https://puck.nether.net/mailman/listinfo/voiceops
