I agree with Shripal, it is doable in broadworks. Depending on the model of VVX, though, your performance may vary. It seems they are using a lesser chip, probably to get the price down, and their performance suffers when hit with too many simultaneous messages. So, a small SCA environment with small volume should work but a bunch of SCAs in a busy environment could be a problem, especially for the lower end of the VVX line.
We also try and break people of the key system habit whenever possible. On Apr 14, 2015, at 20:38, Shripal Daphtary <[email protected]> wrote: depending on the size, Colton, you should be able to emulate a key system with BWKS. i think i remember that you are bwks service provider right? I think broadsoft actually has a document related to creating a key (square) System. Basically, the accounts you create are the lines, e.g. lines 1 through 4. Register each phone with the 4 Lines/accounts. Share the lines to each endpoint with SCA and then use series completion to ring sequentially through lines 1 through 4. i don't know how big this implementation can get, but i'm assuming it would get annoying anything past 4-8 lines. Shri > On Mon, Aug 18, 2014 at 5:58 PM, Colton Conor <[email protected]> wrote: > Can anyone recommend an onsite IP PBX that fully supports the Polycom VVX > series of phones? When I say support I mean auto configure, do firmware > updates, etc...I know most all IP PBX's will at least be able to use the VVX > as a SIP extension. > > The clients wants to emulate a key system. The IP PBX should support SIP > trunks of course for connection to the PSTN. The client also wants the > ability to use a local MoH source, paging, and other common key system > features that hosted systems don't do very well. > > I was thinking switchvox, but they don't have phone feature packs for the VVX > line only the older phones. > > Adtran has the 7060, but according to the latest release notes: > > ADTRAN branded VVX phones (model names ADTRAN VVX 300, ADTRAN VVX 310, ADTRAN > VVX 400, ADTRAN VVX 410, ADTRAN VVX 500, and ADTRAN VVX 600) work with > NetVanta > 7000 series AOS release version R10.8.0 and beyond without requiring an > additional license key purchase. > The equivalent Polycom branded phones will not work with release R10.8.0. If > you are currently using the > equivalent Polycom branded phones with the NetVanta 7000 series, you will > need to either remain on a > pre-R10.8 release version or use the ADTRAN branded version of the VVX phones > until a licensing > mechanism can be added to allow the use of Polycom branded VVX models. > > Looks like that won't be a good option since the client already has regular > Polycom VVX phones not the ones with Adtran's badge on them. > > Any recommendations? > > > > > _______________________________________________ > VoiceOps mailing list > [email protected] > https://puck.nether.net/mailman/listinfo/voiceops _______________________________________________ VoiceOps mailing list [email protected] https://puck.nether.net/mailman/listinfo/voiceops
_______________________________________________ VoiceOps mailing list [email protected] https://puck.nether.net/mailman/listinfo/voiceops
