FWIW, here’s what I implemented on SoundPoint phones with Asterisk at $OLD_JOB:
In sip.cfg: softkey.1.label="Park"
softkey.1.action="$FDialpadPound$$Cp1$1000$Tdtmf$" softkey.1.enable=""
softkey.1.precede="1" softkey.1.use.idle="" softkey.1.use.active="1"
softkey.1.use.alerting="" softkey.1.use.dialtone="" softkey.1.use.proceeding=""
softkey.1.use.setup="" softkey.1.use.hold=""
In features.conf:
1 [general]
2
3 parkext => 1000
4 parkpos => 1001-1009
5 context => parkedcalls
6 parkingtime => 120
7 courtesytone = beep
8 parkedplay = caller call
9 adsipark = yes
10 findslot => next
11 parkedmusicclass=default
In extensions.conf: exten =>
callpark,1,ParkAndAnnounce(pbx-transfer:PARKED|120|SIP/${DIALEDPEERNUMBER}|internal,${DIALEDPEERNUMBER},1)
IIRC, the soft key would park the call in the next available slot, announce the
parking stall number and then hang up.
--
Anthony Rodgers
Security Analyst
Michigan Security Operations Center (MiSOC)
DTMB, Michigan Cyber Security
From: VoiceOps [mailto:[email protected]] On Behalf Of Colton Conor
Sent: Sunday, February 14, 2016 19:23
To: [email protected]
Subject: [VoiceOps] Park Button on Polycom Phones
Anyone know how to make an enhanced feature key (EFK) on Polycom VVX phones
that lets you park a call on a line you are monitoring. Ideal condition would
be to hit the park button on an active call, and then hit the line/blf you want
to park the call on.
The EFK's I have seen out there want you to manually enter the extension of
where you would like to park the call. That is not ideal.
_______________________________________________
VoiceOps mailing list
[email protected]
https://puck.nether.net/mailman/listinfo/voiceops
