Valcom has great support. I would call them and ask them. Most likely you'll need a separate power source.
On Thu, Apr 18, 2019, 5:40 PM Darin Steffl <[email protected]> wrote: > Hey guys, > > https://www.valcom.com/pdf/v1030c_v1036c.pdf > > We're trying to find the best way to interface 3 old Valcom speakers > V-1030c to an IP paging system. > > I have a Snom PA1 but that won't work as we initially thought because > speakers need 4 wires on a 24v power system. So 2 wires are for 24v power, > and the other 2 are for audio. The snom only has a positive and negative > output that feeds passive speakers, not active speakers like these. > > What is the best way to utilize these 3 speakers or should we just replace > the speakers? We're trying to keep budget to a minimum for them so we would > prefer to utilize the same speakers but what's the best way to power them > and feed them audio using the existing 2-pair RJ11 cable they use? > > Thank you > > -- > Darin Steffl > Minnesota WiFi > www.mnwifi.com > 507-634-WiFi > <http://www.facebook.com/minnesotawifi> Like us on Facebook > <http://www.facebook.com/minnesotawifi> > _______________________________________________ > VoiceOps mailing list > [email protected] > https://puck.nether.net/mailman/listinfo/voiceops >
_______________________________________________ VoiceOps mailing list [email protected] https://puck.nether.net/mailman/listinfo/voiceops
