CFO, Glad it worked. You might want to post it on some site or the group list or both, in order to help others that will follow.
Joe -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of cfo Sent: Monday, March 18, 2013 3:21 PM To: [email protected] Subject: Re: [volt-nuts] Seek full Manual - EDC DC millivolt calibrator E100C On Sun, 17 Mar 2013 20:16:29 -0500, J. L. Trantham wrote: > CFO, > > Several months ago, I bought an EDC CR103 DC Current and Voltage > Standard and ran into the same problem. > > I emailed Kron-Hite, asking if the manual was available, if so, how > much, etc. The reply was an emailed .PDF complete manual, schematics > and everything. > > You might try asking them if they still have the manual available, etc. > Couldn't hurt. > > Good luck. > > Joe > Hi Joe Thank you for the tip. I followed your advice , and emailed Kron-Hite service , asking if it would be possible to get a copy of the service manual. And i just got a very plesant response from their Service Department Manager , with the complete E100C service manual attached. and a best of luck with the restoration project. Thumbs up Krohn-Hite , and thank you for the excellent service. CFO - Denmark _______________________________________________ volt-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts and follow the instructions there. _______________________________________________ volt-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts and follow the instructions there.
