In message <[email protected]>, Frank Stellmach writes: >Compare firmware.bin and firmware_rev9.bin... >Difference @ OFFSET 553 >File1 = 8 >File2 = 9
Version number of mainboard firmware >Difference @ OFFSET 1FFFF >File1 = AA >File2 = AB Checksum, low eprom, first pair >Difference @ OFFSET 4E21C >File1 = FD >File2 = 1 >Difference @ OFFSET 4E21D >File1 = 1C >File2 = DC >Difference @ OFFSET 4E223 >File1 = 8C >File2 = 8D >Difference @ OFFSET 4E224 >File1 = D1 >File2 = C1 This changes two limit values from a difference of 120000 to 245760, in what I belive is a part of the selftest code. >Difference @ OFFSET 5FFFC >File1 = 2B >File2 = 2A >Difference @ OFFSET 5FFFD >File1 = 79 >File2 = 7A Checksum, high eprom, last pair >Difference @ OFFSET 5FFFE >File1 = B2 >File2 = A6 >Difference @ OFFSET 5FFFF >File1 = 98 >File2 = 59 Checksum, low eprom, last pair -- Poul-Henning Kamp | UNIX since Zilog Zeus 3.20 [email protected] | TCP/IP since RFC 956 FreeBSD committer | BSD since 4.3-tahoe Never attribute to malice what can adequately be explained by incompetence. _______________________________________________ volt-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts and follow the instructions there.
