It might be nice to do a lithium pack including all the safety controls. The
down side is you would not be able to ship it by air.
Tom
----- Original Message -----
From: "Mark Sims" <[email protected]>
To: <[email protected]>
Sent: Monday, August 25, 2014 9:10 PM
Subject: [volt-nuts] Fluke 732A battery module (and possible
circuitreplacement)
I have a 732A that is missing its battery module. Does anybody have or
know of a source for a replacement?
Also, would there be any interest in a replacement circuit assembly for
the battery module? It would probably consist of a small board that plugs
into the 2x6 pin edge connector and another small board with the ballast
lamp/diode/resistor/thermistors and connections for the
battery/switch/external power jack. The two boards would be connected by
a short ribbon cable and would allow one to add batteries to a 732A that
is missing the battery module. It would not be a complete battery module
with the metal frame and backplate...
_______________________________________________
_______________________________________________
volt-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
and follow the instructions there.
