Randy, Here is the Cal Lab standard solution but the most expensive: http://us.flukecal.com/secure-download?u=http%3A%2F%2Fdownload.flukecal.com%2Fsecure%2F54407002iseng0200.pdf%3Fnvb%3D20150721204511%26amp%3Bnva%3D20150721210011%26amp%3Btoken%3D0a3239567a669e8c502a5&n=44512&r=Literature
The Keysight leads are made by Pomona: http://www.keysight.com/en/pd-1000000308%3Aepsg%3Apro-pn-11053A/low-thermal-emf-lug-to-lug-jumper-set?cc=US&lc=eng Pomona banana plug: http://www.pomonaelectronics.com/pdf/d5291A_102.pdf You can find the Keysight or Pomona with combinations of spade-lug and banana plug. I like spade-lug for the reference end and banana plug for the 3458a side. These are my favorite everyday Cal leads: http://www.tequipment.net/Pomona5295.asp You can usually find these on eBay. Don't forget to get two sets for 4-wire ohms standards. Regards... Don -----Original Message----- From: volt-nuts [mailto:[email protected]] On Behalf Of Randy Evans Sent: Tuesday, July 21, 2015 11:33 AM To: [email protected] Subject: [volt-nuts] Test Leads I recently acquired a Fluke 752A to go with my Fluke 732A and HP-3458A. Now I need to address the need for low thermal test leads. Does anyone have any suggestions for test leads that have low thermal contributions to measurements? I have looked at Pomona 1756 Low Thermal EMF Cables as a starting point but haven't found any other candidates. I have heard that old TV twin lead works well since most are stranded copper wire. I have tried it between my 732A and 3458A and it seems to work fine but I would like to use more professional looking test leads, particularly with correct copper spade lugs (Pomona 2305 Low thermal EMF spade lug, Gold-plated?). Any other suggestions? Thanks, Randy Evans AE6YG _______________________________________________ volt-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts and follow the instructions there. _______________________________________________ volt-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts and follow the instructions there.
