Pete, Congrats! The 7081 is a good meter, although very slow when making 8.5 digit measurements. The key is only necessary for calibrating the instrument and can be bypassed with a clip lead to go into cal mode. I have the part number for the matching input connector somewhere but I'm traveling until March 18 so I can't lay my hands on it. If no one finds it before then I will have a look when I get home.
Steve > On Mar 10, 2016, at 9:53 PM, Pete Lancashire <[email protected]> wrote: > > I just won a Solartron 7081, hopefully did not pay too much. > > I have 30 days ROR. > > Other then the usual things in any used piece of equipment, obvious damage, > Perfume of Allen Bradly, error messages What are some of the thing I should > be looking for. > > The bad news is I do not have a cable or key. Is the key needed to take the > cover off ? > > Someone in the past said the had the key type and a drawing or scan of the > key > are you still here ? > > I could coble up a cable to do the basic E/I/R checks or is there someone > in or near Portland Oregon that has one ? > > Regards > > -pete > _______________________________________________ > volt-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > and follow the instructions there. _______________________________________________ volt-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts and follow the instructions there.
