I searched Amazon with both Southco part numbers and they appear to show that they are available for order.
$0.23 for the grommet http://amzn.com/B01DYYNHP8 $0.21 for the plunger http://amzn.com/B01DYYL66K Shipping is not cheap at a fixed $6.50 for each part number. Selecting a total of 30 each does not affect shipping. Of course, the "In Stock" status could be wrong ... On Tue, Apr 26, 2016 at 6:01 PM, David C. Partridge < david.partri...@perdrix.co.uk> wrote: > I fear that none of those WCL fasteners will fit the 3/16 hole (0.188" > abt. 4.8mm) > > Dave > > -----Original Message----- > From: volt-nuts [mailto:volt-nuts-boun...@febo.com] On Behalf Of Todd > Micallef > Sent: 26 April 2016 21:12 > To: Discussion of precise voltage measurement > Subject: Re: [volt-nuts] PCB fasteners for Datron meters (David C. > Partridge) > > Bill, > > Was it WCL ? West Coast Lockwashers has some push-pull rivets but I have > no idea if they will work. > > > https://www.wclco.com/plastic-components/panel-fasteners/panel-fasteners-plastic-rivets/pushpull-rivets-h-type/ > > They don't look the same but I wouldn't care as long as they were > functional. > > _______________________________________________ > volt-nuts mailing list -- volt-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > and follow the instructions there. > _______________________________________________ volt-nuts mailing list -- volt-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts and follow the instructions there.