It would be interesting to see results of a resistance measurement of some of these "shorts" using an appropriate low-resistance instrument.
Jeremy N6WFO On Sat, Nov 11, 2017 at 8:09 AM Don@True-Cal <truecalservi...@gmail.com> wrote: > Mark, > I would recommend duplicating the Fluke 8508A-7000K 4W Short Calibration > Board design. This board fits my 3458A & 3457A exactly and drops in place > nicely from the top after the binding posts are opened sufficiently. I also > have the banana plug style 2001-182-01B Cal Short that fits my Keithley > 2002 > (also 2000/01/15). I can provide hi-res pictures of either one and provide > measurements if needed. Both styles have Ag plating. See attachment left. > Don > > -----Original Message----- > From: volt-nuts [mailto:volt-nuts-boun...@febo.com] On Behalf Of Mark Sims > Sent: Thursday, November 09, 2017 7:01 PM > To: volt-nuts@febo.com > Subject: [volt-nuts] Banana jack shorting straps > > Here's what they should look like... dots are via stitching between the > top > and bottom. > _______________________________________________ > volt-nuts mailing list -- volt-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > and follow the instructions there. -- Sent from my iPad 4. _______________________________________________ volt-nuts mailing list -- volt-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts and follow the instructions there.
