Randy, There appears to be no MOQ on those bulbs and they have 972 in stock. I think you can order what you want.
Todd On Sat, Jan 6, 2018 at 12:34 PM, Randy Evans <randyevans2...@gmail.com> wrote: > Is there a relaible source for the GT-NE6H1925T neons? Mouser has them for > special order and I suspect they want a high minimum quantity. A source in > China lists them but I'm not sure I trust a Chinese source. > > On Sat, Jan 6, 2018 at 8:19 AM, David C. Partridge < > david.partri...@perdrix.co.uk> wrote: > > > An update the A2B neons didn't work, but: > > > > George Kerber sent me a few GT-NE6H1925T neons. I pulled two out the > > packet and installed them in the chopper, and wonder of wonders the > correct > > waveform appeared at the test point. > > > > This is a great step forward. The earlier neons I tried had way too low > > a firing voltage so both fired. These fired at about 95-100V with a > > sustain at about 68V and do alternate. > > > > Dave > > > > -----Original Message----- > > From: volt-nuts [mailto:volt-nuts-boun...@febo.com] On Behalf Of David > C. > > Partridge > > Sent: 18 November 2017 14:08 > > To: 'Discussion of precise voltage measurement' > > Subject: Re: [volt-nuts] Neon bulbs for HP 3420B or 419A chopper > > > > I'm in the process of getting some A2B neons from Mouser. > > > > Dave > > > > _______________________________________________ > > volt-nuts mailing list -- volt-nuts@febo.com > > To unsubscribe, go to https://www.febo.com/cgi-bin/ > > mailman/listinfo/volt-nuts > > and follow the instructions there. > > > _______________________________________________ > volt-nuts mailing list -- volt-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/ > mailman/listinfo/volt-nuts > and follow the instructions there. > _______________________________________________ volt-nuts mailing list -- volt-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts and follow the instructions there.