David and Brent, I didn't pick up any change in the VFD's surface with the iphone when I powered it on. So I took it apart completely to see the naked VFD. The two getters in the far end corners are still dark black and shiny. Looks brand new as opposed to the light grey bad ones I've seen in pictures.
Since it's apart and disconnected from the unit I'm inclined to power the VFD up directly. I need to map out the connections. Have you guys ever done this before? Rick On Tue, May 5, 2020 at 6:42 AM David C. Partridge < [email protected]> wrote: > It's also worth checking the "getters" in the VFD - are they shiny metallic > or white? If white your VFD has lost it's V(acuum) > > D. > -----Original Message----- > From: volt-nuts [mailto:[email protected]] On Behalf Of > Rick > Bale > Sent: 05 May 2020 03:43 > To: Brent Gordon > Cc: Discussion of precise voltage measurement > Subject: Re: [volt-nuts] Solartron 7081 > > Brent, I check that our tomorrow. Thanks > > Rick > > > _______________________________________________ > volt-nuts mailing list -- [email protected] > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com > and follow the instructions there. > _______________________________________________ volt-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com and follow the instructions there.
