* This is the VOP Radius mailing list * What version of Rodopi are you on? CF
----- Original Message ----- From: "Scott Wolf" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, November 05, 2002 11:23 AM Subject: [VOP RADIUS] Ascend TNT standard attributes > * This is the VOP Radius mailing list * > We are using Rodopi and do get a disconnect reason. Normally either > "User Requested", "Lost Carrier", or "Port Error". We still have not > found a cause for the "Port Error" disconnects. We have found replacing > the clients modems, normally fixes the problem. > > Scott Wolf > Network Engineer / VP > Aginet > > Cary Fitch wrote: > > >* This is the VOP Radius mailing list * > >Well this is really a Rodopi question, but is any Rodopi user getting the > >disconnect reason in the user online usage display? > > > >I get every thing but that Disconnect in R.5.1. > > > >Cary > > > >Also here is a "snippet" > > > >(Debug :00312) 11/4/2002 1:21:28 RECEIVED: 216.86.25.2, code=4 (Accounting > >Request), id=91, len=243 > > ( 1) User-Name = [10]"alfslopez\000" > > ( 4) NAS-IP-Address = 216.86.25.2 > > ( 5) NAS-Port-Id = 263 > > ( 61) NAS-Port-Type = 0 Async > > ( 6) Service-Type = 2 Framed-User > > ( 25) Class-ID = [5]"20909" > > ( 40) Acct-Status-Type = 2 Stop > > ( 41) Acct-Delay-Time = 0 > > ( 44) Acct-Session-Id = [10]"396545041\000" > > ( 45) Acct-Authentic = 1 RADIUS > > ( 28) Idle-Limit = 80 > > ( 46) Acct-Session-Time = 2931 > > ( 42) Acct-Input-Octets = 770836 > > ( 43) Acct-Output-Octets = 6805184 > > ( 47) Acct-Input-Packets = 14977 > > ( 48) Acct-Output-Packets = 15346 > > (195) Ascend-Disconnect-Cause = 45 > > (196) Ascend-Connect-Progress = 60 > > (255) Ascend-Xmit-Rate = 50667 > > (197) Ascend-Data-Rate = 26400 > > (198) Ascend-PreSession-Time = 29 > > (190) Ascend-Pre-Input-Octets = 294 > > (191) Ascend-Pre-Output-Octets = 271 > > (192) Ascend-Pre-Input-Packets = 12 > > (193) Ascend-Pre-Output-Packets = 13 > > (189) Ascend-First-Dest = 224.0.0.2 > > (120) Ascend-Modem-PortNo = 13 > > (121) Ascend-Modem-SlotNo = 8 > > (122) Ascend-Modem-ShelfNo = 1 > > ( 31) Calling-Station-Id = [10]"3615475378" > > ( 30) Called-Station-Id = [10]"3616051111" > > ( 7) Framed-Protocol = 1 PPP > > ( 8) Framed-Address = 216.86.25.84 > > > >----- Original Message ----- > >From: "Mike Herrera" <[EMAIL PROTECTED]> > >To: <[EMAIL PROTECTED]> > >Sent: Sunday, November 03, 2002 11:43 PM > >Subject: [VOP RADIUS] Ascend TNT standard attributes > > > > > > > > > >>* This is the VOP Radius mailing list * > >>Disconnect 43 is a PPP CHAP authentication failed. Disconnect 45 is PPP > >>LCP got terminate request from far end while LCP was in Open State, and > >>what this means is that the user had a standard, user initiated > >>disconnect. > >> > >>MikeH > >> > >> > >>Mike Herrera > >>Access One Online Services > >>http://www.access-one.com > >> > >>-----Original Message----- > >>From: [EMAIL PROTECTED] [mailto:vopradius-request@;vircom.com] > >>On Behalf Of Cary Fitch > >>Sent: Sunday, November 03, 2002 10:47 PM > >>To: [EMAIL PROTECTED] > >>Subject: [VOP RADIUS] Ascend TNT standard attributes > >> > >> > >>* This is the VOP Radius mailing list * > >>What is a disconnect cause 43, and also 45? > >> > >>CF > >> > >> > >> > >>** > >>To leave this list, send an email to [EMAIL PROTECTED] > >>and put the word "LEAVE" in the BODY of the email. > >> > >> > > > >-.-Spam and virus filtered by modusMail using Norman virus engine.-.- > > > >** > >To leave this list, send an email to [EMAIL PROTECTED] > >and put the word "LEAVE" in the BODY of the email. > > > > > > > > > > > ** > To leave this list, send an email to [EMAIL PROTECTED] > and put the word "LEAVE" in the BODY of the email. -.-Spam and virus filtered by modusMail using Norman virus engine.-.- ** To leave this list, send an email to [EMAIL PROTECTED] and put the word "LEAVE" in the BODY of the email.
