* This is the VOP Radius mailing list *
Here is the debug:
(Debug :00353) 11/15/2002 9:47:51 RECEIVED: 65.169.6.238, code=1 (Access
Request), id=245, len=88
( 1) User-Name = [6]"lanham"
( 6) Service-Type = 2 Framed-User
( 7) Framed-Protocol = 1 PPP
( 3) CHAP-Password = [17]"<encrypted>"
( 60) CHAP-Challenge = [16]"9550750726532048"
( 32) Nas-Identifier = [9]"bandwidth"
(Debug :00353) 11/15/2002 9:47:51 Add.Info: Nas=65.169.6.238
(ID:bandwidth), Port=-1, User=lanham
(Debug :00353) 11/15/2002 9:47:51 ** ODBC (0) ACCESS IDENTIFICATION **
(len=132)
Setting Up AC Structure with Default Profile
(Debug :00419) 11/15/2002 9:47:51 Giving Framed Access to lanham.
Upd_User_State: Found User lanham nas_ip: 65.169.6.238 nas_port: -1
newstate:Ack
Building Proxy stream - Specific, id=245, code=2, nas=65.169.6.238
Radius Attributes included in proxy:
( 6) Service-Type = 2 Framed-User
( 7) Framed-Protocol = 1 PPP
( 8) Framed-IP-Address = 255.255.255.254
( 9) Framed-IP-Netmask = 255.255.255.255
( 13) Framed-Compression = 1 Van-Jacobsen-TCP-IP
( 62) Port-Limit = 1
( 28) Idle-Timeout = 2400
( 27) Session-Timeout = 21600
( 25) Class-ID = [2]"3e"
(Debug :00353) 11/15/2002 9:47:51 SendData: dest 65.169.6.238:1228 len:72
I would like to keep Radius from sending back 8, 9, 62, 28, 27
I am using ODBC with Platypus.
Lanham.
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:vopradius-request@;vircom.com]On Behalf Of Lanham Rattan
> Sent: Friday, November 15, 2002 9:38 AM
> To: [EMAIL PROTECTED]
> Subject: [VOP RADIUS] Attributes
>
>
> * This is the VOP Radius mailing list *
> How can I keep VPRRS from sending certain attributes?
>
>
>
> **
> To leave this list, send an email to [EMAIL PROTECTED]
> and put the word "LEAVE" in the BODY of the email.
**
To leave this list, send an email to [EMAIL PROTECTED]
and put the word "LEAVE" in the BODY of the email.
