On 2012-12-05 16:01, Akira Shirakawa wrote:
Hello group,
A quick update from Celani forwarded to 22passi:
Dear Colleagues, just after the "chaotic discovering" of the name of the original Company (06 December 2012) that make replication of our experiment, I realised that some of the documents in the net could not correct because problems arising in the transfer from pc to MAC and viceversa. So, I am sending the original document, pdf format. * Please note the following, specific to the Constantan wire that I gave to STMicroelectronics (type 2L) for the specific experimentation: A) The wire is long ONLY 20cm (usually I used 100cm); B) The layers are ONLY 2 (i.e. type 2L). Usually I used 300-700 layers; C) The pressure in the chamber is only 0.5bar ABS of pure H2; D) They made CALORIMETRIC measurements, not only termometry; E) The SEM-EDX was made, AFTER the H2 absorption, both on reference section (smooth) and possible active sites (like "floweres" in the photo). *The principal investigator that made the experiment is Dr. Ubaldo Mastromatteo, for long time expert in the field. * Please, share the information to the Colleagues included in your mailing list. Thanks for Your time, Francesco CELANI
The attached 'original' document in pdf format: http://www.22passi.it/pirelli/2%20layers%20constantan%20wire%20EDX%20and%20extra%20heat.pdf Cheers, S.A.
