It does look more intense. I also got to thinking that the electrodes could have condensation on them, thus producing a little bit of the effect. After I wiped them down and did another control run with electrodes only, there was very little spark/light. One attempt after wiping the electrodes, produced no spark.
Also, the control with the wire only picks up moisture from my fingers. I'll have to figure out a way to place it to minimize that. I tried a new run with constantan wire. It was the most intense light yet. See the picture at the bottom of the post. http://www.lenr-coldfusion.com/2014/08/26/sun-cell-lite-testing/ On Tue, Aug 26, 2014 at 8:37 AM, Jojo Iznart <[email protected]> wrote: > Yeah, looks like the last two are indeed more intense. Could it just be > a trick of the camera? Does it really look more intense in person? > > If it is indeed more intense, I think Randy may have something.... Bummer. > > For those people who don't understand why I feel the Suncell technology > may be real, it is pictures like these that convince me. How do you > explain more intense sparking when dipped in water. There appears to be no > chemical explanation for this. > > > Jojo > > > > ----- Original Message ----- > *From:* Jack Cole <[email protected]> > *To:* [email protected] > *Sent:* Tuesday, August 26, 2014 8:39 PM > *Subject:* Re: [Vo]:SunCell - Initial Replication Attempt > > Jojo, > > I'll see if I can accomplish that. In the meantime, here are the results > of testing. > > http://www.lenr-coldfusion.com/2014/08/26/sun-cell-lite-testing/ > > We do get sparks without dipping in water. The last two are after dipping > in water. What do you think--more intense? > > Jack > > > > On Tue, Aug 26, 2014 at 6:09 AM, Jojo Iznart <[email protected]> > wrote: > >> consider grinding a titanium bar into powder and then forming a small >> pellet with water. This should be the quintessential Mill's fuel pellet. >> See if the spark is as intense as Mill's suncell. >> >> >> Jojo >> >> >> >> ----- Original Message ----- >> *From:* Jack Cole <[email protected]> >> *To:* [email protected] >> *Sent:* Tuesday, August 26, 2014 7:06 PM >> *Subject:* Re: [Vo]:SunCell - Initial Replication Attempt >> >> Yes, I was planning to do that. I'll make a video of each test case. >> I'll try with just the electrodes, with the copper wire only, and then dip >> it in water. >> >> I'm also planning to try with titanium. It will take a little work to >> get a small enough piece of that cut. >> >> I'm also going to try a small piece of metal with a little impression >> drilled into it so I can place water into the impression. Then I'll set >> the electrode into the impression where the water is. >> >> >> On Tue, Aug 26, 2014 at 5:51 AM, Jojo Iznart <[email protected]> >> wrote: >> >>> could you try copper wire without dipping in water and also with >>> nothing at all. - no copper wire, just the electrodes. These would be your >>> controls. to compare it with samples with water. >>> >>> >>> Jojo >>> >>> >>> >>> ----- Original Message ----- >>> *From:* Jack Cole <[email protected]> >>> *To:* [email protected] >>> *Sent:* Tuesday, August 26, 2014 6:39 PM >>> *Subject:* Re: [Vo]:SunCell - Initial Replication Attempt >>> >>> It was with a tiny piece of copper wire that I dipped in water and put >>> between the electrodes. The amount of water is minuscule (the amount that >>> managed to adhere to the metal). You don't get that without the water. >>> >>> >>> On Tue, Aug 26, 2014 at 5:13 AM, Jojo Iznart <[email protected]> >>> wrote: >>> >>>> was that the spark with or without fuel (water pellets)? >>>> >>>> >>>> Jojo >>>> >>>> >>>> >>>> ----- Original Message ----- >>>> *From:* Jack Cole <[email protected]> >>>> *To:* [email protected] >>>> *Sent:* Tuesday, August 26, 2014 9:15 AM >>>> *Subject:* [Vo]:SunCell - Initial Replication Attempt >>>> >>>> Hi Folks, >>>> >>>> I was excited to receive my spot welder today. After ensuring it was >>>> in working order, I decided to get right to it and see if I could get >>>> anything like what BLP showed. Lo and behold I got something on the first >>>> try. >>>> >>>> I remembered Mills talking about all the different possibilities for >>>> types of conductors that they might use in the commercial device, and >>>> copper was one of them. I cut a very small piece of copper wire, dipped it >>>> in water, placed it on the electrodes, hit the switch, and pop with some >>>> bright light! >>>> >>>> Here's a link to the vid. Sorry for the bad camera work. >>>> >>>> Let me know what you think. I'll do another vid soon in complete >>>> darkness. >>>> >>>> http://youtu.be/d6XYqEhwZgA >>>> >>>> Jack >>>> >>>> >>> >> >
