If this phenomenon is really true, it suggests a number of questions, e.g. :

 

A reactionless thrust means that the power output could be very large  since
power = thrust * speed, and if the speed is high so is the power, so COP
could be very big.

Does the RF power needed increase as the speed increases?  Speed with
respect to what -- the ether?

 

It would be trivial to make a self sustaining energy source if one of these
was spinning or moving very fastly driving a generator for its own RF
source.

 

Hoyt Stearns

Scottsdale, Arizona US

 

 

 

From: MarkI-ZeroPoint [mailto:[email protected]] 
Sent: Friday, September 19, 2014 8:55 AM
To: [email protected]
Subject: [Vo]:Anomalous Thrust Production from an RF Test Device

 

FYI:

I know this kind of tech has been discussed by the Collective before, but
here's some recent results from NASA.

http://www.libertariannews.org/wp-content/uploads/2014/07/AnomalousThrustPro
ductionFromanRFTestDevice-BradyEtAl.pdf

 

Excerpt from Abstract:

"During the first (Cannae) portion of the campaign, approximately 40
micronewtons of thrust were observed in an RF resonant cavity  test article
excited at approximately 935 megahertz and  28  watts.  During  the
subsequent  (tapered  cavity)  portion  of  the  campaign,  approximately 91
micronewtons of thrust were observed in an RF resonant cavity test article
excited  at  approximately  1933  megahertz  and  17  watts.  Testing  was
performed  on  a  lowthrust  torsion  pendulum  that  is  capable  of
detecting  force  at  a  single-digit  micronewton level.  Test  campaign
results indicate that the RF resonant  cavity thruster design,  which is
unique as an electric propulsion device, is producing a force that is not
attributable to any classical  electromagnetic  phenomenon  and  therefore
is  potentially  demonstrating  an interaction with the quantum vacuum
virtual plasma."

 

-mark iverson

 



---
This email is free from viruses and malware because avast! Antivirus protection 
is active.
http://www.avast.com

Reply via email to