Some years ago I invented the 666 machine in my garage. I took a electric 
motor driven three phase AC car alternator and with those three AC inputs I 
patterned three diagonal series sequences as shown 
here;http://www.flickr.com/photos/harvich/6638773467/By then reversing the 
middle segment polarity of each phase and resonating the balanced outputs this 
created six interior magnetic compressions; resulting in six magnetic 
expansions outwards from the poles created from this 1/6th cycle interference 
pattern. Essentially with this method SIX off timed magnetic fields were 
created from a source that only employed THREE off timed signals as its input. 
But very funny magnetic measurements ensued from these poles as what was also 
created was a situation where the induced signal made by induction with 
neighboring phases was actually being made AHEAD in time from what was received 
by the phase rotation dictated by the delivery wires. In fact what appeared to 
be happening was that this advanced timing errant induced signal started 
reacting with itself!  Each time the cycle was repeated it advanced itself 
further apart in time from its (original) source of emf. A voltage vector that 
rotates in time or a phasor effect was made. Every 24 cycles it would return to 
its origin point and start all over again. In the meantime,(pun intended) this 
extra signal rotating in time would interact with its line delivery voltage so 
that it could completely oppose that line signal after 12 cycles of time 
rotation, and then 12 cycles later could constructively add to the line input 
signal. Situations were devised whereby dual secondaries could interact 
inductively with themselves so that they could completely oppose the primary 
vibration to enter its secondary and for a portion of time (pun intended) the 
machine would work backwards and instead the output could power the 
input.http://www.flickr.com/photos/harvich/8291688443/
Later on discrepancies in time itself were noted as follows;Google "Topological 
Evidence of Time Distortion in the 666 machine" 
www.youtube.com/watch?v=uakJJKGf-mM.A theory of 3D vectors to explain the 
results showing how  the traditional 2D vectors plotted out on a flat paper 
could be curved into a cone shape to account for the observed results taking 
place. This method shows that the curvature of time-space can be altered to 
account for the results taking place, and that we DONT have to travel near the 
speed of light for these relativistic effects to take place. Later on I 
analyzed this in reference to the triple polarized film paradox; where the 
light from two polarized films crossed at right angles completely blocked the 
light transmission, but when an intermediary film placed at an equidistant 
angle between the two outer films would then allow the light to proceed through 
all three polarized film segments. I reasoned that the three 666 machine 
secondaries were like three polarized film segments  off set at an angle to 
only slightly diminish the light going through them.  Then like the INVERSE 
example of the polarized film paradox, the middle segment of film was now made 
at a right angles to the outer segments. In this analogy three 
(secondary)sources of emf are obtained so that when put in series 97% of what 
would be obtained if all three signals were completely unified in time result. 
( The flat paper vector drawing of the input voltages predicts that only 86% of 
the total should be received.)  Now to make the analogy the MIDDLE voltage 
contribution of that element is minimized by shorting that element out, 
allowing a free vibration from its primary influence to unsue, but also making 
its voltage contribution to the series chain to approach zero volts. The end 
result of this machination is that now the output voltage EXCEEDS the sum of 
its inputs. But like the polarized film paradox the new relationship brought on 
by the outer and inner films SUPERCEEDS  what would be obtained from just what 
the outer elements alone would deliver. And indeed the ordinary laws of 
addition are ~ what is obtained when we reference the voltages obtained by 
relying on what the inner to outer seriesed voltage readings 
provide.https://www.flickr.com/photos/harvich/16104981376/
Latest video; Overunity of voltage summations in actual energized 
field.http://youtu.be/DAWku6HsDjwPioneering the Applications of Interphasal 
Resonances http://tech.groups.yahoo.com/group/teslafy/

Reply via email to