Mats Lewan is said to have seen the QX produce deep blue color when running at 100%. Even at 30%, the QX produces light at between 400 to 500 nm that I saw recorded with my own eyes recorded on the spectrograph as seen in the video. I don't beleive the info on light production that is coming from Rossi. That info might be self serving. Rossi might be seeing what he wants to see. Rossi says that the light produced was measured at 1100nm. This is infrared light and is not even visible. How can Rossi get a valid blackbody heat reading when the QX is running at 30% power level? Those people at the Demo should have reacted to this discontinuity in logic during the demo in real time.
On Thu, Nov 30, 2017 at 11:08 PM, bobcook39...@hotmail.com < bobcook39...@hotmail.com> wrote: > Higgins— > > > > I agree with your comment about a high voltage (short) at the beginning of > the reaction in the QX reactor. It is consistent with the flash of light > which can be seen at the end of the reactor upon the initial power > application. > > > > Your assessment does not address the source of energy during the off > phases of the control circuit. I would argue that the reaction producing > heat is occurring in the Ni electrode with the Li acting as a good > convective heat transfer agent from the electrode to the outer > circumference of the reactor where the water cooling occurs. > > > > The electric current is generated by the net positive charge that results > from the reaction that produces energetic alphas that cross the annular > space where the dusty plasma exists and charge the outer surface of the > reactor. > > > > I disagree with Axil that the suncell hydrino reaction is like the QX > reaction. The spectra of the two reactions are not reported to be alike. > > > > Bob Cook > > . > > > > > > > ------------------------------ > *From:* Axil Axil <janap...@gmail.com> > *Sent:* Thursday, November 30, 2017 10:50:23 AM > *To:* vortex-l > *Subject:* Re: [Vo]:Rossi dog & pony show with full audio > > The QX is a downsized version of the SunCell with the plasma ball reduced > to the size of a speck of dust. You can understand what is happening inside > the QX by looking at what is happening inside the SunCell. The metal used > in the QX is aluminum whereas the metal used to support the plasma inside > the SunCell is silver.Lithium is not a reactant and remains in the vapor > form. The hydrogen pressure is very high because the amount of solid fuel > that is placed inside the QX must be substantial in order for the fuel > loading to be manageable. Rossi cannot work with(load) nanograms of fuel > > On Thu, Nov 30, 2017 at 12:44 PM, Bob Higgins <rj.bob.higg...@gmail.com> > wrote: > >> In the experiments I am aware of, waveforms were only tried as applied to >> the heater coils (or in my case to a magnetic field coil). There was no >> evidence of enhanced XH. This could be because the waveform was not well >> "coupled" to the active medium. These were heat driven Parkhomov-like >> experiments. In the case of others that have seen benefit from such waves, >> the stimulus was applied more directly to the reaction medium - >> electrolysis or to the hydrogenated wires. I believe there could be >> benefit in such stimuli, but it would have to be appropriately coupled to >> the reaction. >> >> In a conversation I was having with MFMP folks, I had this to say about >> what I thought was described for the QX reactor and power supply: >> >> >> *Since it has been suggested/said that Li is present inside the QX, >> during a discharge it will be in gas phase; and when it is turned OFF, it >> will condense on the inside of the tube and conduct across the electrodes. >> Then, upon re-start, the tube will be shorted with this condensed Li metal >> path and a high current will be needed to heat the Li to boiling. Once the >> Li path evaporates, the tube will have to be run in gas discharge mode. So >> initially the tube is a short and needs a high current, low voltage to >> begin, and then it has to switch into gas discharge mode which is low >> current high voltage. Also, in the gas discharge mode, the supply will >> have to be ballasted as a current source. This is why the supply is >> complex, the waveform is complex, and why it is also difficult to >> characterize what energy has been supplied over time to the tube. There is >> the claim that there is balanced electron/ion flow. That would be the H+ & >> Li+ positive ions and e- negative electrons conducting bodies. * >> >> *In a plasma tube, the plasma itself can be at 2700K while the glass >> itself can be kept cool with water cooling. The heat is transferred by the >> plasma atoms striking the glass, and there will be a cooler gas buffer zone >> around the inside of the glass where it is too cool to be in plasma state - >> insulating the core plasma discharge. The higher the gas pressure, the >> more power that must be added to the plasma to compensate for the cooling >> of the glass tube on the plasma. This tells me that the gas pressure >> inside the QX is probably pretty low, probably under 50 torr, and maybe >> more like 10 torr. The problem you would have is keeping the Li from >> condensing on the glass tube in that cool zone and shorting out the plasma >> discharge. It may take care of itself - as the lithium condenses on the >> glass, the plasma will go to it instead of the electrodes causing the Li to >> re-boil (sort of like an arc discharging to a piece of metal wire brought >> into the gap between a spark discharge). * >> >> * Rossi has not demonstrated that his tube produces XE to any of us. We >> basically have to take the unreliable, untrustworthy word of a technically >> incompetent scoundrel that he is producing any XE - and on a waveform that >> would be very difficult to characterize by someone that is technically >> sound.* >> >> On Thu, Nov 30, 2017 at 10:31 AM, JonesBeene <jone...@pacbell.net> wrote: >> >>> Bob >>> >>> >>> >>> Have you (or MFMP) experimented with any variation of the Dardik >>> superwave? >>> >>> >>> >>> I think it is more than coincidence that Rossi, Brillouin, Kimmel, >>> Energetics etc, etc have employed interfering waveforms as the input power. >>> >>> >>> >>> Even if Rossi’s recent effort was a null result, it is true that his PS >>> seems unusually lossy. >>> >>> >>> >>> Sadly, that is the most hopeful thing that anyone can honestly say about >>> it…. >>> >>> >>> >>> >>> >>> *From: *Bob Higgins <rj.bob.higg...@gmail.com> >>> >>> >>> >>> - the demo served no net purpose - except possibly to those there >>> that were granted greater access to the data. You and I should take it >>> as >>> a presumed null experiment since there was inadequate data shared to show >>> any XE. >>> >>> >>> >>> JonesBeene wrote: >>> >>> >>> >>> >>> - The most important Euro Patent from Dardik, El-Boher et al >>> entitled "Pulsed low energy nuclear reaction power generators" EP 1656678 >>> B1 with a grant date of 2004. This is also known as the "superwave" >>> patent. >>> It is similar and precedes the Brillouin IP - and will also rain on the >>> Godes parade, if it turns out that structured waveforms are the key to >>> success. >>> >>> >>> >>> >>> >> >> >