Ah OK Fred, I thought you were talking about conventional chemistry/physics
for once (should have known better ;)
Michel
----- Original Message -----
From: "Frederick Sparber" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Sunday, April 23, 2006 1:10 PM
Subject: Re: EONIUM-HERE (H3O*) Powered Engines
Michel Jullian wrote:
Hi Fred,
Enthalpy being a state variable, if it releases high energy when consumed
I
imagine it absorbs high energy when formed?
I think the answers are here, Michel.
Dyatlov's Polarized Vacuum:
http://www.americanantigravity.com/articles/526/1/Polarization-Model-of-the-
Inhomogeneous-Physical-Vacuum
Davis and Puthoff's Polarized Vacuum:
http://www.earthtech.org/publications/davis_STAIF_conference_1.pdf
And Mills' Blacklight Power website.
Use the Joe Cell plans.
http://pesn.com/2006/04/13/9600257_Bill_Williams_threatened/
http://pesn.com/
Build-your-own Joe Cell:
http://educate-yourself.org/fe/fejoewatercell.shtml
Why you don't want "Magnetic" materials.in your Orgone Accumulator.
aka EONIUM-HERE Cell.
316 Stainless Steel Alloys:
Chemical Formula
Fe, <0.03% C, 16-18.5% Cr, 10-14% Ni, 2-3% Mo, <2% Mn, <1% Si, <0.045% P,
<0.03% S
304 SS Alloys:
Chemical Formula
Fe, <0.08% C, 17.5-20% Cr, 8-11% Ni, <2% Mn, <1% Si, <0.045% P, <0.03% S
The normal CO2 from air that gets into the water forms carbonic acid
(H2CO3)
which extracts the iron from the 316 stainless steel as a sludge that
floats off the top giving a porous
Ni-Cr surface enhancing the Helmholtz Layer Interface.
Fred
Michel
----- Original Message -----
From: "Frederick Sparber" <[EMAIL PROTECTED]>
To: "vortex-l" <[email protected]>
Sent: Sunday, April 23, 2006 12:01 PM
Subject: Re: EONIUM-HERE (H3O*) Powered Engines
> Eonium, (H3O*) is a neutralized hydronium ion, a High-
> Energy-Releasing Entity (HERE) formed at the Metal-H2O (Helmholtz
Layer)
> Interface
> from the Natural Free Energy Auto-Ionization of water into H3O+ and OH-
> ions.
> It has been around for Eons, and can form at any surface that can
> donate
> an electron to neutralize the H3O+ ion
> H2O- n(H3O*) drawn from an Eonium Cell for a 4.0 liter 4 cycle engine
> with a Venturi effect (Air - H2O or H3O*) mixing ratio of 2:1 at 2400
> RPM/4
> equal about 5 liters of H2O-n(H3O*) ~ 1/12 gram per second or 300
> grams
> 3/4 lb (as H2O) per hour.
> A gram of H2O evaporated at 15 torr (~ 0.6 inches Hg at 65 F)
> occupies
> ~ 62 liters volume.
> The "Eonium" generation takes place at the Helmholtz layer at the
> Metal-H2O interface,
> hence the battery voltage/energy serves more as a "biasing" function
than
> a
> power-consuming electrolysis source.
> The Metal-H2O interface surface area per cylinder/displacement
> requirement is crucial for adequate H2O-H3O* production, but the
> load/demand
> control without a "throttle" might be sporadic..
>
> You can hear more about Eonium-Here here. :-)
>
> Fred
