Re: Stacked Washer Electrolyzer

[Frederick Sparber]

BTW, The Saito F-56 engine arrived yesterday.

 

A real jewel of quality. With 2 inch OD Fenders the

area doubles to 20 square cm per side.

 

Since you're not trying to electroplate H2O, why not use AC?

 

http://www.horizonhobby.com/Search/Default.aspx?BrandId=SAI

----- Original Message -----

From: Frederick Sparber

To

Sent: 5/12/2006 2:16:04 AM

Subject: Re: Stacked Washer Electrolyzer

The 1.5 inch OD, 1/4 inch I.D. Fender Washers have 10 square cm

of surface area each side when placed over a 1/4 inch rod with

1/2 inch diameter spacers.

 

About 100 Kohm resistance and about 65 Picofarad capacitance

between 1.0 cm-spaced washers with 1.0 Megohm-cm

water.

 

Five Fenders spaced on a stick, a 12 volt AC-DC adaptor, a

clear plastic pop bottle, and Wallah Water.

Ergo ~ 3 volt per cell Brown's Gas etc?

 

http://www.barnhillbolt.com/

 

All Thread Nylon & Fiberglass Rod & Nuts:

 

http://www.barnhillbolt.com/index.php?root=menu&level=&menu=101&catid=-1&custid=748308167

 

Fender Washers:

 

http://www.barnhillbolt.com/specs/WasherFlatFender.htm