Jones - Hi there,
I only saw and studied one type ,
It was about 150mm long and quite narrow - possibly about 20mm dia,Extreamly
well constructed in S/s with alot of ground finishes - not turned,
It was this type he had fitted on the beach Buggy in his garage beside the
office and freaked out at some Swiss visitors who tried to dismantle one of
the injectors.
Regretably they were "Dead" items and did nothing at any time I was there.
best wishes
Noel in Ireland
----- Original Message -----
From: "Jones Beene" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Friday, June 16, 2006 2:20 PM
Subject: [Vo]: Re: Nickel, Iron and Photo etc
Noel,
Which injector was this?
Among the amazing number (thirty-something) of patents and applications,
Meyer had a number of different variations for hydrogen/water injectors -
one of them seems to be a direct copy of Puharich. I wonder how many were
actually constructed and tested, or if even Meyer knew which one worked
best ?
4,389,981 Hydrogen gas injector system for internal combustion engine
(U.S.A.)
1,231,872 Hydrogen injector system (CDA)
1,233,379 Hydrogen gas injector for internal combustion engine( CDA)
1,234,774 Hydrogen generator system (USA)
3,970,070 Solar heating system (USA)
1,234,773 Resonant cavity hydrogen generator (CDA)
0086439 Hydrogen gas injector system for internal combustion engine (WPO)
1,584,224 Hydrogen Injection System (JPO)
4,936,961 Method For the production of a Fuel Gas "Electrical polarization
Process" (U.S.A.)
1,694,782 Resonant Cavity For Hydrogen Generator (JPO)
----- Original Message -----
From: Noel D. Whitney
Maybe i am off the wavelength but Meyer,s injectors featured a ramping
voltage over the final length of the unit caused by diamensional changes
inside the injector - the Volts per unit area of cross section varied from
some 20Kv to 100Kv.as the water mist/hydrogenOxy mix came to the injectors
very fine apature
Similar - Maybe ??
Rgds
Noel in Ireland
