BlankJones wrote.. On one lower level there is the well-known prhenomenon of magentic precession of domains in a permanent magnet (PM), no?
Precession involves angular momentum, no? Angular momentum can be transfered, no? If a PM is capable, at the domain level, of transfering some of its precessional angular momentum away from its aligned and synchronous domains- then that would necessarily be a conservative situation... and the magnet would/should become demagnetized... unless ?? Unless something (some quantum force or effect) akin to the Casimir force was capable of applying an effectvie pressure, at the domain level, so that the angular momentum of the PM - which had been lessened by a small amount in the transfer of energy [to either a valence electron or another unrelated domain] was immediately recouped (or "regauged" as Bearden likes to miss-state). Howdy Jones, Been thinking about how to fit a section of 4 inch clear PVC pipe into the test rig we are designing . The pipe will "encase" the eyewall type vortex .. approx 3 ft in vertical length. In this section we plan to flange in various pipe segments for experiments. One will be a section of magnets. The idea is to use neodym 1/2'"dia x 1/4 " and imbed them flush with the inside dia of the pipe. Then came and idea to fix the magnets into the pipe in an upward spiral that matches the normal vortex upward spiral . Also add some removable s shaped"clips" inside the pipe would enchance the vortex possibly. The question arose about adding a section of pipe for a ultrasonic "horn " segment .. above or below the magnet section.. We decided since the pipe segments are modular, they can be installed either way to determine results. Had another e-mail suggesting we design a segment with copper rings and add a " tesla coil" setup firing circuit into the water vortex... sounds kinda wild but we will add it if anyone has any experience in electro- water setups of this type. Weare also studying how to install a UV lamp inside the pipe to interact with the vortex. Als planning to arrange the 4 inch vertical pipe so an external pipe shroud can be installed and sealed with another liquid. This experiment could be used to determine if there is a temperature differential result from the formation of the vortex in the inner pipe filled with water.. Fun stuff.. Richard
Blank Bkgrd.gif
Description: GIF image
