Harry, Harry. If the Chinese have a good magnetic shield that will do this, where work in (the short distance of turning the knob with less than 44lbs of applied pressure to offset the 44lbs pull of the magnets) can't you see an application?
No this is worth the 2hrs on the Houston roads, just so I can tear it apart and see what they are doing. The PDF on the item does not state id the turning of the switch cancels he whole attraction or just causes a reduction. So it is worth looking at as I have played with mags for over three hours now and can not see how they are doing it. It has to be duck soup simple, right? Guess I just can't get my ducks in a row when thinking about it. -----Original Message----- From: Harry Veeder [mailto:[EMAIL PROTECTED] Sent: Wednesday, July 11, 2007 2:29 PM To: [email protected] Subject: Re: [Vo]:How are they doing this you'll have to describe the application you have in mind. Harry On 11/7/2007 1:18 PM, Stiffler Scientific wrote: > Would that not be great? Can you see the application? > > The $16 is small, but the drive to the store is 1hr each way so I thought I > could save a trip if someone had the answer that said 'nothing new here'. > Never can tell where stuff of interest will pop up :-) > > -----Original Message----- > From: Harry Veeder [mailto:[EMAIL PROTECTED] > Sent: Wednesday, July 11, 2007 2:12 PM > To: [email protected] > Subject: Re: [Vo]:How are they doing this > > > might the switch move some sort of magnetic shielding? > > Harry > > On 11/7/2007 1:00 PM, Stiffler Scientific wrote: > >> That was my thought, but 44lbs of pressure on this little switch, even > with >> a little gear change seems a bit much don't you think? >> >> -----Original Message----- >> From: Paul Lowrance [mailto:[EMAIL PROTECTED] >> Sent: Wednesday, July 11, 2007 12:55 PM >> To: [email protected] >> Subject: Re: [Vo]:How are they doing this >> >> >> I believe the switch merely pulls the magnet back away from the face. >> >> >> >> Stiffler Scientific wrote: >>> The link dd not work after pasting it here, >>> >>> use the following item# to search for it; 93329-2NDA >>> >>> -----Original Message----- >>> From: Stiffler Scientific [mailto:[EMAIL PROTECTED] >>> Sent: Wednesday, July 11, 2007 12:31 PM >>> To: Vortex-L >>> Subject: [Vo]:How are they doing this >>> >>> >>> Turn the magnetic field on and off with a slight movement of a switch, >>> unless I am drawing a blank here this device could be interesting? >>> >>> Here is a link to it. >>> >>> http://www.harborfreight.com/cpi/ctaf/displayitem.taf?function=Search >>> >>> >> >
