I later discovered that the demo contained in the second video was not up
to par since upon field energization something caused the somewhat loose meter 
stator line connection to go open circuit, thus only one phase was active in 
powering the TC. This is corrected in the third video. The first video shows 
the 6 voltage meters that the unloaded 666 machine produces where the proof of 
10% extra time is obtained by the calculations ensued by the law of cosines, 
which is also shown near the beginning of video.  Obviously the initial purpose 
of the Nazi Bell LLC will be to obtain funds for the building of  a 966 machine 
and then a further 12-6-6 machine to see if these constructions will distort 
time more then the cited 10%.
Discovery of the Wireless Tesla Coil
http://www.youtube.com/watch?v=ahGOsXb8fG0
Operation of the wireless TC first shown where again unbeknownst to me a loose 
probe lead connection developed upon TC turn on; on stator line 1, where this 
line serves both phase 1 and phase 3, so technically only phase 2 was enabled 
in this first demonstration, so it becomes questionable why the device was even 
working! This is corrected on the final video of this wireless TC demonstration
http://www.youtube.com/watch?v=2oA-nEZZ07k
Operation of the wireless TC with all 3 stator lines connected. Notice that 
when the amperage through the primary amperage meter is by passed by 
substituting a short across its probe leads, amperage conduction through that 
meter is not entirely circumvented! This may indicate further problems that 
need testing where in later work,(such as the shell game), I have shorted out 
components to obtain current for further experiments from the same meter 
assembly with the assumption that the short will by pass any current on those 
components. Perhaps this is not entirely true, and the problem will be further 
looked into.
http://www.youtube.com/watch?v=vnQL5JMQRFw
Sincerely Harvey D Norris
Pioneering the Applications of Interphasal Resonances 
http://tech.groups.yahoo.com/group/teslafy/


      

Reply via email to