Dear Friends.. The 5 demo-experiments made with the Rossi E-cats were impressive, however far from perfect, the heat generated and claimed can be overrated.The results are vulnerable to some unverifiable hypotheses- hidden energy sources or non-apparent energy losses/overratings (wet steam)
In order to eliminate any doubts (in the very limits of sane rational and pragmatical thinking), I have first given a Call for a perfect experiment- and it is my pleasure to thank the colleagues who gave me advices and suggestions. An other important source of information is Joshua Cude who is one of the most active E-cat, FF, LENR skeptics and is skilled in engineering. (my personal opinion). Unfortunately I could not agree with all the ideas of Joshua. (just now I have to tell him that it wiil be very difficult to measure with precision the flow of relatively small quantities of steam- but enthalpy measurement solves the problem completely and in a very simple way. THE PROTOCOL- please discuss! A. There will be performed at least 3 separate experiments, if possible quasi identical (*my idea based on the first principle of the Pilot Plant Engineer: 1 result = NO result, 1 measurement = NO measurement. 1 test = NO test)* * * * * *B. The preferred experiment is cooling water in, warm water out- simple elementary heat measurement. (a.k.a.* *calorimetry)* *If steam generation will be used then the enethalpy of the steam will be measured using the hyper-simple method described here: * http://egooutpeters.blogspot.com/2011/05/call-for-perfect-e-cat-experiment.html C. The minimum duration of an experiment will be 72 hours, or alternatively (to eliminate the supra-realist doubt the the generator itself is consumed e. g. by burning, 14 kWhs have to be generated for each Kg. of the cell. D. The hydrogen bottle should be disconnected from the E-cat after start-up and carried away. E- In case that it is not possible to work with the generator in the self sustaining mode- zero input for hours- due to control problems etc.- the input energy must be measured with the greatest care nnd precision (details?) Joshua, it is your turn! Peter -- Dr. Peter Gluck Cluj, Romania http://egooutpeters.blogspot.com
