Many modern power plants run at close to 1,000F and at 3,000 psi.  The weight 
of steam equals the weigh of water under this super-critical condition.  Water 
does not boil but gets thinner and thinner.  Solids do not accumulate in the 
boiler and there is no boiler blow down.  Any solids in the water get carried 
through and deposited on the turbine.  Water treating is a science with these 
boilers.   The re heaters glow red hot in the turbine room.   Materials in the 
boiler tend to fail under this heat.  More recently boilers have moved away 
from this condition and backed off on temperature a bit.  They are not as 
efficient but more reliable and milder steel may be used in more of the 
construction.


Frank Z



Reply via email to