Axil,
Appears to me that the hands on realist experimenters should be
*chomping at the bit* to duplicate and improve upon Mint Candy:
"Re: [Vo]:Boeing Electric Airliner---LENR Application=???
Mint Candy
Fri, 11 May 2012 07:20:21 -0700
1. NGK LZ5AGP
3381 Plugs
2. Used Fix-A-Thread thread inserts M14-1.26 14.25mm 9/16
3. Used White thin F/C pipe tape to seal and ease of thread use.
4. Screwed easily into 1/2" middle of Fe pipe T
5. Finely turned off, let cool and examined inside. Cotton swab showed
black carbon deposits near plug.
6. Reassembled but attached ignition coil output to plug. Worked as
before using AC input or DC with door bell in series to create buzz
interuptions.
7. Will try Chan oil circulation with suspended Ni next
M.
----- Original Message -----
From: Axil Axil
Sent: 05/09/12 02:10 PM
To: vortex-l@eskimo.com
Subject: Re: [Vo]:Boeing Electric Airliner---LENR Application=???
Mint Candy,
Thanks for taking the time to let us know about your success. I appreciate it.
The reports of success with Hexane are growing in number and your report is
most promising. Did you see any indications of radiation from your reactor?Is
your process easy to control; easy to start up and easy to shut down.
Have you noticed any diminution of power production as time goes on? Do you
plan to enter the market as a manufacturer?
Any additional information about your situation that you feel does not
compromise your competitive position in this new marketplace would be of high
interest to me.
Thanks for your success and its report to us:
Axil
On Sun, May 6, 2012 at 9:42 AM, Mint Candy < m.ca...@gmx.us > wrote:
1. Purchased 60 plate heat exchanger at :
http://www.dudadiesel.com/heat_exchangers.php
2. Purchased Ni at : http://www.xuzhounano.com/a/About/About_Us/
3. Mixed Ni & catalyst powder wth Hexane from J. T. Baker
4. Filled one side exchanger with suspension.
5. Evacuated two days ending at 250 C.
6. Followed http://www.mail-archive.com/vortex-l@eskimo.com
procedure using Medical Lesion RFG to spark plug.
7. Perfect control using pulse adjustment on RFG and Propane flow.
8. Incredible steam output steady 2 weeks under pressure.
9. Operating at 650C.
10. Must now get patent on catalyst.
M."
I would assume that for the progress of LENR if they communicated a
purchase wish list including supplier and price that they need the
remainder of Vortes followers who's main contributions tend toward
essays and critiques with a sprinkling of science friction would
overwhelmingly send generous contributions without hesitation. I will
start it off by sending each of the participating experimentalists a
$5.00 money order if you include your name, postal address and brief
description of your procedure.
Warm Regards,
Reliable
"Axil Axil wrote:
Fri, 22 Jun 2012 17:50:49 -0700
I found about 1000 patents using the compound keywords…… Metallic AND SWNT
On Google patents, use the “Download PDF” button to see the complete patent
including the diagrams.
This looked good to me on a quick scan of the material.
http://www.google.com/patents/US8163263
I found 134 patents using the compound keywords…… Armchair AND SWNT
This looked good to me on a quick scan of the material.
http://www.google.com/patents?id=pyz5AQAAEBAJ&printsec=frontcover&dq=8,038,795&hl=en&sa=X&ei=Ig7lT7jdCoHn0QG-mInWCQ&ved=0CDcQ6AEwAA
<http://www.google.com/patents?id=pyz5AQAAEBAJ&printsec=frontcover&dq=8,038,795&hl=en&sa=X&ei=Ig7lT7jdCoHn0QG-mInWCQ&ved=0CDcQ6AEwAA>
Also
http://www.google.com/patents/US7807127
*Just thinking out loud here, but do you think the size of the Fe or Ni
nanopowders used as catalyst seed material might influence the creation of
Armchair SWNTs.*
I think this is true and the smaller the particle, the more active the SWNT
formed from it will be.
I will get you more as time permits.
On Fri, Jun 22, 2012 at 3:59 PM, Jojo Jaro <jth...@hotmail.com> wrote:
**
Axil,
I found a page discussing the properties of SWNTs and it mentions that
"Metallic" SWNTs exhibit "Long Coherence Lengths".
http://ipn2.epfl.ch/CHBU/NTelectronic1.htm
From the page:
"Numerous experiments on SWNTs and MWNTs allowed to gain additional
informations. At low temperatures, SWNTs behave as coherent quantum wires
where the conduction occurs through discrete electron states over large
distances. Transport measurements revealed that metallic SWNTs show
extremely long coherence lengths and that the presence of defects or
disorder has little influence on electron conduction. This is not the case
for semi-conducting SWNTs, which show far shorter coherence lengths. "
Is this the same concept you were referring to in your post about charge
accumulation in 1D structures. If so, it appears that SWNTs are better
than MWNTs; specifically Metallic SWNTs appears to be the right allotropes
that would enchance Charge accumulation.
And since, arc discharge generators normally produce a mixture of Metallic
and Semiconducting SWNTs, it would explain the "hit and miss" results we
been getting with Cold Fusion.
If this is correct, tuning the reactor to bias its production towards
Metallic SWNTs should increase power production in LENR.
Any ideas how to do this? I understand that doping the anode with Fe or
Ni powders increases the production of SWNTs, I can tune my reactor towards
SWNT production, but it seems, nobody knows how to tune production of the
Metallic SWNTs variety over the Semiconducting Variety. That is, Armchair
nanotubes as opposed to ZigZag or other chirals.
Just thinking out loud here, but do you think the size of the Fe or Ni
nanopowders used as catalyst seed material might influence the creation of
Armchair SWNTs.
Can you direct me to papers about SWNT charge accumulation.
Jojo"
