3 days of loading a *wire*-based demo setup. Celani wanted a safe demo for NIWeek and ICCF17. Using nano powder is a different application I read the patent applies in particular for nano-structured Nickel, e.g. powder / foam.
On Mon, Aug 13, 2012 at 6:11 PM, Andre Blum <[email protected]> wrote: > Thanks. > One of Celani's helpers told Krivit that it took 3 days to load the > hydrogen. I wouldn't consider that fast :-). It was interesting though that > after that he could just let the gas out, take the setup with him to Texas, > reload with hydrogen and immediately see the effect and pick up the > electrical resistance value exactly where it was left in its slight > downward slope. > > > On 08/13/2012 12:05 PM, Teslaalset wrote: > > Celani got a patent published early 2011 on treating nickel nanastructures > to get fast and high hydrogen absorbtion in Nickel: > > http://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=0&ND=3&adjacent=true&locale=en_EP&FT=D&date=20110210&CC=WO&NR=2011016014A2&KC=A2 > Maybe in the meantime he has advanced this method but it seems to me a > good direction of his thinking. > > > > On Mon, Aug 13, 2012 at 5:41 PM, Andre Blum <[email protected]> wrote: > >> In the presentation they say they use agents as well: >> "We use several layers of "agents", coated around a Si-Al ceramic surface >> surrounding the nickel foam, to help RSH atoms to survive this journey. >> Some of these agents are ZnO, MgO and ZrO2." >> >> Do I undertand correctly that the Celani treatment mainly consists of >> stripping off the plastic insulation off ISOTAN44 and then running a 2A to >> 3A current for about 5 minutes? And that this grows nanostructures on the >> wire surface? That sounds pretty simple to try. >> >> >> On 08/13/2012 11:31 AM, Alain Sepeda wrote: >> >> Quite logical they think about using off the shelves products, and >> especially well known techniques used for catalyst that increase active >> surface... >> Good engineer practice. >> maybe mixing that material with other treatment (like the one Celani do >> on his wires, but adapted to foam), could even make it better... maybe is >> it what they do... >> >> did anybody else thought about using that kind of foam in LENR research ? >> >> >> 2012/8/13 Andre Blum <[email protected]> >> >>> The nickel foam that defkalion describes in their NI-week slideshow >>> seems to be an off-the-shelve product. >>> >>> Funny enough, it is available from a company called ecocatalysis, ecat >>> in short. >>> The stuff is shown here: >>> >>> http://ecocatalysis.com/en/products/foam-materials-foam-metals/nickel-foam-en.html >>> >>> Nice ecat logo! >>> The photo of the foam is the exactly the same as the one used in the >>> defkalion slide deck. >>> >>> Andre >>> >> >> >> > >
