Jones,
Nice suggestions, as for the wavelength being too long I would suggest
that the same mechanism responsible for the odd black light spectrum emitted by
Mills powder will have the opposite effect on the wavelength of radiation
propagating into the Casimir cavity such that travelling wave sees the walls of
the cavity growing further apart locally while the spacing remains fixed from
our perspective.. a relativistic environment induced by Casimir suppression of
virtual particles between the walls of the cavity. My posit is that the
wavelength will eventually find an area where the cavity wall suppress space
time sufficiently that from our perspective the wave is exactly the desired
frequency. The syntax becomes difficult as time from one perspective is space
from another.
Regards
Fran
_____________________________________________
From: Jones Beene [mailto:[email protected]]
Sent: Monday, January 14, 2013 12:02 AM
To: [email protected]
Subject: EXTERNAL: RE: [Vo]:I feel really good about what I have done
From: Frank Z
It predicts that if you can induce a wave motion in the dissolved
hydrogen or deuterium with a velocity of one mega meter per second cold fusion
will progress. Normal sound velocity in a solid is 2 kilo meters per second.
Now we reduced the cold fusion process down to a material condition. We must
apply external stimulation at 1 million meters per second. We must transfer
that velocity to the dissolved protons.
The problem now become how can we increase the external stimulation.
Laser, radio wave, or thermal. How can we get the dissolved deuterium to
resonate with and effectively couple with a velocity of one mega-meter per
second. The applied transverse vibrations must induce a wave motion of
1,094,000 meters per second in the dissolve protons. I don't know the answer
of how to do this yet.
One possible suggestion for analyzing hydrogen gain to accommodate
megahertz-meter, since we have the luxury of working backwards from some known
values which are thought to work - would be based on having uniform pore size
of Casimir dimensions for containing hydrogen - say 8-10 nm in diameter. There
is evidence of relativistic hydrogen in such pores so they could easily couple
to photons which were in semi-coherence with phonons at the peak blackbody
frequency.
You would want the cavities and the encompassing nickel alloy to vibrate
at roughly a frequency equivalent to the trigger temperature of the reaction
(its peak blackbody frequency of ~40 THz). The needed wavelength would
therefore be much longer than the cavity diameter, but photons would couple to
the protons in the cavity in a known way which would be related to the fine
structure constant.
Around 40 THz and 600+ K is within the range of mid-IR
frequencies/temperature which is applicable to trigger a Celani type experiment
using a nickel alloy. The peak blackbody wavelength would be around 7 microns.
This wavelength times the frequency is about 300 times too long for
megahertz-meter of course -- but we would never expect heat alone to suffice.
Assuming that the frequency times the cavity diameter were to equal about 3200
meters per second - that is 300 times too low, but a combination of both is
about right - one megahertz meter. How you verbalize that so that it makes
sense is not clear. I suspect that this is where the fine structure constant
comes into play.
Bottom line - I could envision a reactor working gainfully with 8 nm
cavities and 40 THz thermal semi-coherency based on positive feedback of
semi-coherent photons at that frequency - with very high net gain.
If the energy gain is found to be especially robust at roughly those
parameters, Frank should be congratulated.
Jones
