There is a discrepancy on the HV power indeed. At some moment in the video Mats remarked that he measured 1100 Watt input power of the HV unit. There was no instant response to that remark. The wall dispay indicated around 200-250 Watt HV input power to the reactor. Despite the fact that it was mentioned that HV is modulated, the 1100 W remains a high value. HV units should have a higher efficiency than observed.
Op maandag 29 juli 2013 schreef Craig ([email protected]) het volgende: > On 07/28/2013 05:08 PM, Alan Fletcher wrote: > > There may well be a pressure (and temperature) drop down the output > > tube to outlet --- but from steam tables and a guess at the tube size > > and length I'd be surprised if it is more than about 0.5 bar -- so the > > COP is most likely at the 10+ level. (Presuming that Mats' calculation > > of the spark power is wrong). > > I read that Defkalion answered Mats Lewan's objection to the HV power. > There is apparently a 20% duty cycle; so Mats calculated input power > should have been divided by 5. > > I can't remember where I read this, however. > > Craig > >
