It is straightforward to now understand Rossi's mouse is just a remotely operating nanoparticle generator for the "catalytic" based Cat.
Rossi just decoupled nanoparticle generation from their participation in the LENR process catalyzed by the Cat stage of the Rossi Hot Cat. On Fri, Mar 14, 2014 at 3:35 PM, Axil Axil <janap...@gmail.com> wrote: > This auto cat converter system is consistent with the basic principles of > nano particle based cold fusion. Think of this system as a dry P&F cell. > > In a P&F cell, HHO production and nanoparticle based LENR reactions would > happen as a unified reaction. > > In this Hot Cat system nanoparticle production is moved to a separate and > remote electrolysis process. > > This is what Mills is trying to do when he speaks of formulating "nascent > water" which is a requirement of his new arc based reaction. > > HHO contains water clusters (aka solid state water molecules) formed by > arc discharge. The micro particles on the catalytic converter are in the > some goldilocks size range as the NiH reactor of .1 to 5 microns. The > surface of the auto cat converted is rough and its reaction surface area is > large. > > I would predict that any remotely connected cooling plasma process whose > end product is nanodust could feed this type of system. > > For the experimenters among us, I would try a cavatation system to prepare > the solid state dust in a water solution. The water in the cavatation > system should contain dissolved potassium carbonate salt. This potassium > salt should produce potassium nanodust in a wide range of diameters. Such > randomized dust particles sizes amplify nanoplasmonic power levels. After > this nanoparticle feedstock production process, use a transducer powered > nebulizer to vaporize the water and mobilize the solid nanoparticles in the > air stream from the water suspension. > > A one process step high pressure injector system (over 100 bar) might > produce cavatation and particle suspension in a one-step parallel process. > > Such a LENR system has all the earmarks of a great cold fusion system. > These earmarks include dynamic NAE production, good reaction control, and a > low power consuming nanodust production process. > > By closing this Hot Cat system, a further enhancement is to remove the air > from the system and use hydrogen as the nanoduct carrier as in the NiH > reactor. > > > On Fri, Mar 14, 2014 at 1:57 AM, MarkI-ZeroPoint <zeropo...@charter.net>wrote: > >> FYI fellow Vorts: >> >> >> >> Grain of salt required? >> >> >> >> http://peswiki.com/index.php/OS:Justin_Church's_H-Cat >> >> >> >> This is an open source design that involves venting hydroxy or HHO gas - >> UN-ignited -- through a catalytic converter (the kind used in automobiles) >> -- in ambient conditions -- and generating significant heat in the process. >> >> >> >> For example, Justin recently sustained around 900 ºF (482 ºC) for nearly >> 8 hours using around 200 Watts to run his HHO device generating about 1 L >> per minute. He says it isn't hard to exceed the 1200 ºF limit of his >> meter, measuring the inside temperature. >> >> >> >> Youtube channel is here: >> >> http://www.youtube.com/user/jdcproducts/videos?flow=grid&view=0 >> >> >> >> -Mark >> >> >> > >
