I realize that this is not an answer to your situaltion, but I have the Profesional SuSE 7.1 if you are interested I will have it at the IF. Or I can get it to you. Let me know if you are interested. Rusty On Friday 09 March 2001 17:06, you wrote: > I am getting frustrated with this problem. I had this drive working with > SuSE 6.2 eval, but it won't write anymore since I installed SuSE 6.4 eval. > I had problems with the distribution kernel 2.2.10 locking up in X > windows, so I grabbed 2.2.18 and compiled it instead. That fixed the > lockups, and I can read the CD just fine... I just can't seem to write to > it. I have tried several blank CD-Rs, and the results below are typical. > I have found a hint on the web that not all is well with ide-scsi and > newer versions of cdrecord: > > http://groups.google.com/groups?q=cdrecord+ide-scsi+dummy&num=30\ > &hl=en&lr=&safe=off&rnum=10&seld=930816565&ic=1 > > but nether earlier nor later versions of cdrecord seem to work for > me. Can anyone suggest direction to investigate further, before I ask > in the ruckus of comp.os.linux.[setup|misc]? > > root@mirimichi:~ > cdrecord -scanbus > Cdrecord 1.8 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling > Using libscg version 'schily-0.1' > scsibus0: > 0,0,0 0) * > 0,1,0 1) * > 0,2,0 2) * > 0,3,0 3) * > 0,4,0 4) * > 0,5,0 5) * > 0,6,0 6) 'IOMEGA ' 'ZIP 100 ' 'D.06' Removable Disk > 0,7,0 7) * > scsibus1: > 1,0,0 100) 'SONY ' 'CD-RW CRX100E ' '1.0m' Removable CD-ROM > 1,1,0 101) * > 1,2,0 102) * > 1,3,0 103) * > 1,4,0 104) * > 1,5,0 105) * > 1,6,0 106) * > 1,7,0 107) * > > # the behaviour is similar without -dummy... I just don't want any > # coasters.. > # the cd spins up, the countdown finishes, and then the cd stops > # spinning and the light goes out, and about 10 seconds later it spits > # out the first error. > root@mirimichi:~ > cdrecord -dummy speed=2 dev=1,0,0 -data /opt/x > Cdrecord 1.8 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling > scsidev: '1,0,0' > scsibus: 1 target: 0 lun: 0 > Using libscg version 'schily-0.1' > Device type : Removable CD-ROM > Version : 0 > Response Format: 1 > Vendor_info : 'SONY ' > Identifikation : 'CD-RW CRX100E ' > Revision : '1.0m' > Device seems to be: Generic mmc CD-RW. > Using generic SCSI-3/mmc CD-R driver (mmc_cdr). > Driver flags : SWABAUDIO > Starting to write CD/DVD at speed 2 in dummy mode for single session. > Last chance to quit, starting dummy write in 1 seconds. > cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error > CDB: 2A 00 00 00 00 00 00 00 10 00 > status: 0x2 (CHECK CONDITION) > Sense Bytes: 70 00 03 00 00 00 00 12 00 00 00 00 0C 00 00 00 > Sense Key: 0x3 Medium Error, Segment 0 > Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0 > Sense flags: Blk 0 (not valid) > cmd finished after 10.383s timeout 40s > write track data: error after 0 bytes > Sense Bytes: 70 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00 > > root@mirimichi:~ > uname -a > Linux mirimichi 2.2.18 #7 Fri Mar 9 12:31:54 PST 2001 i586 unknown > > root@mirimichi:~ > lsmod > Module Size Used by > sg 15800 0 (autoclean) > sr_mod 15804 0 (unused) > ide-scsi 7496 0 > cdrom 27452 0 [sr_mod] > rtl8139 11872 1 (autoclean) > aha1542 11024 0 > > root@mirimichi:~ > grep -i ^[^#].*scsi /usr/src/linux/.config > CONFIG_BLK_DEV_IDESCSI=m > CONFIG_SCSI=y > CONFIG_SCSI_CONSTANTS=y > CONFIG_SCSI_LOGGING=y > CONFIG_SCSI_AHA1542=m > CONFIG_SCSI_DEBUG=m > CONFIG_I2O_SCSI=m > > #note that I have eliminated ide-cd entirely from the kernel... > root@mirimichi:~ > grep -i ^[^#].*ide /usr/src/linux/.config > CONFIG_BLK_DEV_IDE=y > CONFIG_BLK_DEV_IDEDISK=y > CONFIG_BLK_DEV_IDETAPE=m > CONFIG_BLK_DEV_IDEFLOPPY=m > CONFIG_BLK_DEV_IDESCSI=m > CONFIG_BLK_DEV_IDEPCI=y > CONFIG_BLK_DEV_IDEDMA=y > CONFIG_IDEDMA_AUTO=y > CONFIG_PARIDE_PARPORT=m > CONFIG_JOY_SIDEWINDER=m > CONFIG_SOUND_TRIDENT=m > > root@mirimichi:~ > head -54 /etc/modules.conf | grep ^[^#] > path=/lib/modules/`uname -r` > path[misc]=/lib/modules/`uname -r'/extra > alias eth0 rtl8139 > alias tr0 off > alias scd0 sr_mod > alias sda1 aha1542 > alias sda4 aha1542 > alias scsi_hostadapter ide-scsi > alias fb0 off > alias block-major-48 off > alias block-major-49 off > alias block-major-72 off > alias block-major-73 off > alias block-major-56 off > alias block-major-57 off > alias char-major-10 off > alias parport_lowlevel parport_pc > options parport_pc io=0x378 irq=none,none > options ide-cd ignore=hdc > options w83781d ignore=0,0x2d > pre-install sg modprobe ide-scsi # load ide-scsi before sg > pre-install sr_mod modprobe ide-scsi # load ide-scsi before sr_mod > > --------------------------------------------------------------------------- > Jeff Newmiller The ..... ..... Go Live... > DCN:<[EMAIL PROTECTED]> Basics: ##.#. ##.#. Live Go... > Work:<[EMAIL PROTECTED]> Live: OO#.. Dead: OO#.. Playing > Research Engineer (Solar/Batteries O.O#. #.O#. with > /Software/Embedded Controllers) .OO#. .OO#. rocks...2k > ---------------------------------------------------------------------------
