Hello all :)
I finally recompiled the kernel on my Libretto 50CT with very good
results. The kernel is about half the size now (478K versus 962K
compressed). The APM is working properly. Sound is setup and currently
not working yet.
First issue: I set the pty's in make menuconfig for 64 and after
compiling and rebooting the system still has 256 pty's. Does anyone
know why this is? This is for a laptop and I should not need many pty's
as I will almost always be using it directly. I will occassionally ssh
into it from another computer. It seem like I could get away with even
a smaller amount of pty's maybe 32 even. I know this seems picky, but
I really want to fine tune this laptop with limited resources as much as
I can.
Second issue: I have tried out various settings with hdparm and this is
what seems to work best so far: hdparm -c1m16X34W1 /dev/hda . I am
looking for any advise to get it to work at its best. Here is the info
from hdparm -i (from bootup) :
/dev/hda:
Model=TOSHIBA MK6412MAT, FwRev=K2.10 B, SerialNo=49221953A
Config={ Fixed }
RawCHS=13424/15/63, TrkSize=0, SectSize=0, ECCbytes=46
BuffType=0(?), BuffSize=0kB, MaxMultSect=16, MultSect=16
DblWordIO=no, OldPIO=2, DMA=yes, OldDMA=0
CurCHS=13424/15/63, CurSects=12685680, LBA=yes, LBAsects=12685680
tDMA={min:120,rec:120}, DMA modes: sword0 sword1 sword2 mword0 mword1
*mword2
IORDY=on/off, tPIO={min:120,w/IORDY:120}, PIO modes: mode3 mode4
UDMA modes: mode0 mode1 mode2
And from hdparm -I (directly from the drive)
/dev/hda:
Model=OTHSBI AKM4621AM T , FwRev=2K1. 0 B,
SerialNo=94229135 A
Config={ Fixed }
RawCHS=13424/15/63, TrkSize=0, SectSize=0, ECCbytes=46
BuffType=0(?), BuffSize=0kB, MaxMultSect=16, MultSect=16
DblWordIO=no, OldPIO=2, DMA=yes, OldDMA=0
CurCHS=13424/15/63, CurSects=12685680, LBA=yes, LBAsects=12685680
tDMA={min:120,rec:120}, DMA modes: sword0 sword1 sword2 mword0 mword1
*mword2
IORDY=on/off, tPIO={min:120,w/IORDY:120}, PIO modes: mode3 mode4
UDMA modes: mode0 mode1 mode2
Any help would be appreciated.
Stephen
