Hey all, Does anyone know much of anything about burning cds in mode 2? Specifically, I'm interested in whether I can burn a filesystem in excess of 702 MB on a 700 MB disc. The following does not seem to work:
cdrecord -v speed=4 dev=0,0,0 -mode2 big_img.iso This results in the error: Starting new track at sector: 0 Track 01: 0 of 717 MB written.cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error CDB: 2A 00 00 00 00 00 00 00 1F 00 status: 0x0 (GOOD STATUS) cmd finished after 6.270s timeout 40s write track data: error after 0 bytes Sense Bytes: 70 00 06 00 00 00 00 13 00 00 00 00 29 00 00 00 00 00 Writing time: 18.283s Fixating... Fixating time: 0.013s cdrecord: fifo had 64 puts and 1 gets. cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. If I record in mode 1 with "-data small_img.iso", all is well. Is mode 2 only used for writing raw data? Is this purely software level, or may the hardware have something to do with it? Any ideas? Thanks, Matt _______________________________________________ vox-tech mailing list [EMAIL PROTECTED] http://lists.lugod.org/mailman/listinfo/vox-tech
