Appologies for the very late posts... apperently balsa hasn't been sending the e-mail queue...
On 16:00 31/03 Doug Huckaba wrote: > I had this problem. it has to do with the NIC settings, check to make > sure both are running at 10mb half-duplex. On mine my laptop nic was set > to 100mb full duplex and server was set to 100mb half both going through > a 100mb hub. I believe that hub's are always half duplex. (switches can > go to full). > > -Doug > > On 14:00 31/03 Patrick Stockton wrote: >> I am expierancing a huge ammount of trasmission collisions on my home >> lan. >> Currently there have been 11,493 transmission errors and 304,565 >> collisions >> after an uptime of only 2 days of uptime. My linux box acts as a router >> between our cable modem and the rest of the lan. >> >> The disto is Mandrake 8.2 >> Kernel 2.4.18-6 >> eth0 uses the Realtek 8139too driver and is connected to the lan >> eth1 uses the tulip driver and is connected to the cable modem >> >> On the other end I've got a Sony Vaio laptop also using a Realtek 8139 >> built >> in network card running Windows XP Home. >> >> Inbetween them I've got a 10 Megabit hub. >> >> Anybody have any ideas of avenues I should look down to resolve the >> collisions? >> >> _______________________________________________ >> vox-tech mailing list >> [EMAIL PROTECTED] >> http://lists.lugod.org/mailman/listinfo/vox-tech >> > _______________________________________________ > vox-tech mailing list > [EMAIL PROTECTED] > http://lists.lugod.org/mailman/listinfo/vox-tech _______________________________________________ vox-tech mailing list [EMAIL PROTECTED] http://lists.lugod.org/mailman/listinfo/vox-tech
