Okay, a while back I said the machine appeared to have a modem, that was not responding to software config attempts (so I didn't mess with it much)... I got a chance to look into it today, it is actually a Farallon ISA Etherwave card (made about 1995), basically it's a 10bT ethernet card and repeater... it has two 10bT ports, plug one into your network connection and using a straight through cable you connect the card to another ethernet device.
This thing uses the 3c509 driver, appears to be non-PnP and has no jumpers and is auto-detected at IO 0x300, IRQ 10. I'm looking for setup disk to see if it's possible to enable a PnP mode on the card, or change those settings. The funny thing is that the card's repeat and transmit things work fine, so the machine plugged into the other port is working fine. But the host the card is plugged into does not receive any packets. Maybe some website has info on how to get this working... _______________________________________________ vox-tech mailing list [EMAIL PROTECTED] http://lists.lugod.org/mailman/listinfo/vox-tech
