Does anybody out there have any experience with this card? The box I'm planning on putting this in has:
ASUS P5AB VIA Apollo VP3 chipset (VT82C597) (onboard ide bus = ata/66) AMD K6 500 Kernel 2.4.18 (debian woody, custom kernel) I haven't decided which drives (besides the new WD 40G) will plug in, but the newest are only ata/100. I can't figure out what chipset the new controller card is running or what kernel driver will apply. I have done some google searches & RTFM'd the kernel drivers but all I can determine is that the older ATA/100 card uses the promise drivers, but I'm unsure if Maxtor switched contoller chips for this line. I purchased this on a whim while getting a new drive, but haven't opened the box so that the return process might go a little smoother. Unfortuantly the maxtor support site seems to think that nobody would ever need this info because there is no mention of the tech specs. Any insight is appriciated... -doug -- _______________________________________________ vox-tech mailing list [EMAIL PROTECTED] http://lists.lugod.org/mailman/listinfo/vox-tech
