CD burners frequently go bad. I did have one that would not recognize that a disc was in the drive, which looks similar to your problem here.
You might try seeing if it will _read_ a CD. -- Rod http://www.sunsetsystems.com/ On Sunday 24 November 2002 08:12 pm, Bill Kendrick wrote: > Well, I'm trying to test CD-R writing under Melissa's Linux box > (it's a Mitsumi CR-2801TE), and with some "audio CD-R's" I had, > I was getting "cannot write - application code mismatch" from cdrecord, > although it looked like it was sucessfully doing _something_. > > The discs were unmountable, though. > > > So, I went out and bought a set of TDK 74min, 650MB discs, > "for computer burning" (vs. just audio CD-Rs - I specifically AVOIDED > getting the 80min discs I saw at the store, in case this drive didn't > like them; I figured lowest common denominator). > > > When I even try to use "cdrecord" with the "-dummy" option, it immediately > quits out and yells: > > cdrecord: No disk / Wrong disk! > > > Specifically, the command is: > > # nice --10 cdrecord -v -dummy speed=4 dev=1,0,0 tuxpaint.raw > > and the full output is: > > Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 J�rg Schilling > TOC Type: 1 = CD-ROM > scsidev: '1,0,0' > scsibus: 1 target: 0 lun: 0 > Linux sg driver version: 3.1.22 > Using libscg version 'schily-0.5' > atapi: 1 > Device type : Removable CD-ROM > Version : 0 > Response Format: 1 > Vendor_info : 'MITSUMI ' > Identifikation : 'CR-2801TE ' > Revision : '1.10' > Device seems to be: Philips CDD-522. > Using generic SCSI-3/mmc CD-R driver (mmc_cdr). > Driver flags : SWABAUDIO > FIFO size : 4194304 = 4096 KB > Track 01: data 8 MB > Total size: 9 MB (00:58.69) = 4402 sectors > Lout start: 10 MB (01:00/52) = 4402 sectors > cdrecord: Input/output error. test unit ready: scsi sendcmd: no error > CDB: 00 00 00 00 00 00 > status: 0x2 (CHECK CONDITION) > Sense Bytes: 70 00 02 00 00 00 00 06 00 00 00 00 3A 01 > Sense Key: 0x2 Not Ready, Segment 0 > Sense Code: 0x3A Qual 0x01 (medium not present - tray closed) Fru 0x0 > Sense flags: Blk 0 (not valid) > cmd finished after 0.001s timeout 40s > cdrecord: No disk / Wrong disk! > > > Any ideas? Did I just pick up discs that won't work? > > Doing some Googling, for the "No disk / Wrong disk" message, I noticed > one person who said their drive burns just fine, unless the machine's > been on for a while. Then it complains. If they reboot, it becomes happy > again. (I didn't notice if they mentioned what particular brand of drive > it was.) > > > Of course, most often people's suggestions are "try a different brand of > disc." > > Goddamn. CD burning is irritating, isn't it!? >:^( > > > -bill! > i've got some nice, shiny gold coasters for sale :^) never used! _______________________________________________ vox-tech mailing list [EMAIL PROTECTED] http://lists.lugod.org/mailman/listinfo/vox-tech
